Tortoise/LED/LS150 Test

preview_player
Показать описание
Short test of our initial wiring set-up of a tortoise switch machine, alternating LEDs and the Lenz LS150.
  1. Michael Highsmith
Рекомендации по теме
Tortoise/LED/LS150 Test 0:00:26

Tortoise/LED/LS150 Test

Tortoise Switch Machine 0:00:38

Tortoise Switch Machine with LEDs

Tortoise switches on 0:00:24

Tortoise switches on double slip crossover

15 Tortoise Point 0:15:44

15 Tortoise Point Motor Disassembly

09 Wiring and 0:34:33

09 Wiring and tortoise point motors | Tortoise point motor wiring | Point motor controller

moteur tortoise 0:00:16

moteur tortoise

Lenz LS150 & 0:00:10

Lenz LS150 & MTB-mp1

Tortoise Slow Motion 0:12:23

Tortoise Slow Motion Switch Machine - INSTALL & WIRING

IMG 4375 0:00:15

IMG 4375

First working turnout 0:00:45

First working turnout under test.

Aiguillage PECO moteur 0:00:23

Aiguillage PECO moteur TORTOISE

58. Tortoise Point 0:13:39

58. Tortoise Point Motors Part 2

Tortoise switch machine 0:25:21

Tortoise switch machine wiring to led's, turnouts and signals

Controlling a Tortoise 0:03:56

Controlling a Tortoise switch machine with a MegaPoints Servo Controller

moteur tortoise 0:00:22

moteur tortoise

Comparatif servos-Tortoises 0:01:22

Comparatif servos-Tortoises

Healthy Tortoise Test 0:01:33

Healthy Tortoise Test

Commande d'aiguillage V1 0:00:19

Commande d'aiguillage V1

Test moteur aiguillage 0:00:09

Test moteur aiguillage Roco

Tortoise w-momentary pushbutton 0:02:21

Tortoise w-momentary pushbutton control

Smail Switch Machine 0:11:32

Smail Switch Machine and Layout Update #2: Progress Report - A Hobby Adventure !

Slow-Motion Tortoise Motor 0:06:11

Slow-Motion Tortoise Motor Interface

Présentation du réseau 0:00:57

Présentation du réseau - panneau technique et câblage (version 2022)

Test soudure rails 0:00:10

Test soudure rails

Комментарии
Автор

If the LEDs are powered from the LS150 Accessory decoder output then they will only receive power for the pulse duration - The output of the LS150 is designed to switch off so that it does not burn out point motors that have no facility for cutting their own power once they reach the end of their movement.  The minimum time is 0.1seconds and the maximum is 10.  They cannot be set to continuous output. Cheers       Chris

digitalcareline
Автор

Hi
Can you you let me know how you wired your Tortoise to the Ls150 as I’m struggling to replicate what you have done and I can’t find anyone to show or tell me how to wire the tortoise up👍🤞🤞
Pail

vanessapaul