Ozone Leading Edge bladder remove and install

If you own an Ozone inflatable kite and want to know how to remove the leading edge bladder from your kite, watch the videos and follow the steps. If you are interested on removing the strut bladder or you want to repair a bladder, please watch " Strut bladder, remove and install" and "Bladder puncture repair" videos from this channel.

Contact your Ozone dealer if you want to upgrade your kite buying the new valve system kit and watch the videos to know how to change it properly.

[prolifedoc]

I have a 6M WASP. This is the first video that showed me how to replace the strut that goes under the handles.
Big indoor room. Take it slow. Patient assistant.$115 for a new bladder on the 6M.

[krivo]

All nice and easy but my god putting the retainers even with soap and all is a nightmare... Surely there is an easy technique for it? Been pulling on the hose as per video but my fingers are numb and the retainers not going anywhere. Short detailed video on how to sort them would be highly appreciate. Cheers

[JochenBilderbeek]

Not clear how to put back in the end of the bladder. When I opened it up the end of the bladder was through a small velcro ring inside (very hard to reach) and flipped back. Not sure how I can get that back in exactly the same way.

[jackignatev]

Took me a while to understand that "LE" is not french article here

[Zarrell]

I got the broad larger valves and hoses. Retainers impossible to get on all the way even with soap and proper technique. I don’t have time for this shit, will use zip-ties instead.