Wireless Groups and Channels Explained | Shure

preview_player
Показать описание
When setting up multiple wireless microphones, it's imperative that each one is on a clean frequency. This will prevent interference and audio dropouts. Join Yuri from Shure as he explains how using Groups and Channels can solve this problem and why it's so important to coordinate your frequencies, especially when operating systems that are not in the same group.

  1. Shure Creators
  2. can you change the frequency of a wireless mic
  3. how to change channel on shure wireless mic
  4. shure wireless channel finder
  5. shure wireless tools
  6. which wireless channel should i use
Рекомендации по теме
Wireless Groups and 0:03:37

Wireless Groups and Channels Explained | Shure

Understanding WIRELESS - 0:16:59

Understanding WIRELESS - What are BANDS, GROUPS, and CHANNELS?

What Are Wireless 0:15:32

What Are Wireless 'BANDS' and Which One Should YOU Get?

Wireless Networking Explained 0:12:16

Wireless Networking Explained | Cisco CCNA 200-301

Wireless Microphone Channel 0:02:13

Wireless Microphone Channel Tuning

4. Understanding Wireless 0:31:22

4. Understanding Wireless Channels in 2.4 GHz and 5 GHz Frequencies | Wi-Fi Channels Explained

Inside Wireless: MU-MIMO, 0:04:37

Inside Wireless: MU-MIMO, Multi-User Multiple Input Multiple output

How to Coordinate 0:07:47

How to Coordinate a Wireless System

Cisco Wireless LAN 0:11:08

Cisco Wireless LAN Controller (WLC) Interface Groups

IEEE 802.11 Wireless 0:11:14

IEEE 802.11 Wireless Fidelity (Wi-Fi)

Using Wireless Workbench 0:14:45

Using Wireless Workbench For Wireless Microphone Frequency Coordination

Wireless Network Technologies 0:04:38

Wireless Network Technologies - CompTIA A+ 220-1101 - 2.3

5 COMMON MISTAKES 0:19:59

5 COMMON MISTAKES When Using WIRELESS MUSIC GEAR

Wireless Workbench 7 0:17:44

Wireless Workbench 7 Fundamentals Training (Pt.4): How to Perform a Coordination

Watch This Russian 0:02:56

Watch This Russian Hacker Break Into Our Computer In Minutes | CNBC

Wireless Standards - 0:09:07

Wireless Standards - N10-008 CompTIA Network+ : 2.4

Learn Wireless Network 0:20:20

Learn Wireless Network Security in 20 Minutes - All the Basics You Need to Know

The Truth About 0:09:25

The Truth About Wireless Charging

Wireless Technologies - 0:16:22

Wireless Technologies - N10-008 CompTIA Network+ : 2.4

BLX Wireless - 0:01:46

BLX Wireless - Scanning and Setting Frequencies

Wireless Technology - 0:06:11

Wireless Technology - Animation Video | Network Kings

Shure Wireless Systems 0:04:36

Shure Wireless Systems Overview

Watch these hackers 0:05:42

Watch these hackers crack an ATM in seconds

BLX Wireless - 0:01:10

BLX Wireless - Basic Setup

Комментарии
Автор

No of groups and channels in shure SLXD system

sankarn.s
Автор

Hi Yuri, Quick question, I have a Shure ULXP4 and it wouldn't show Mic signal on the LED meter. It's locked into identical Group/Channel on both Transmitter and Receiver but when I speak into the mic, no signal. Tried different groups and channels but to no avail. Please help!

vanners_USA
Автор

HI Yuri. If I already have an AKG Receiver (fixed 864.375mhz - ism 2) is there a way to set Group / Channel on the BLX-1 863-865mhz Beltpack Transmitter to match that ? Then I can buy the Shure bodypack. Thanks.

greatwarwalk
Автор

So my question is, more and more I see different brands of IEM and wireless mic pop up at shows.... Shure PSM, Sennheiser, etc etc.
How would one handle that, turning them all off and scanning and sync'ing one at a time? Only channel, because group is irrelevant?

lookmanostrings