The Truth About the Anycubic Kobra 3 Max printer

Affiliate Link, I earn from qualifying purchases.

Bundle Anycubic Kobra 3 Max Combo 3D Printer, Large Printing Volume Multicolor 3D Printer, 600mm/s High-Speed Printing Precise Auto-Leveling & Anti-Skip Upgrade 420 * 420 * 500mm Print Volume

[PeteweeJP]

I got mine a few weeks ago and love it so far. I had one clog after my third print but was an easy fix. It looks like you're missing a piece of cable management that came with mine. It's a cable holder that plugs in above the x-axis. You can see the slot on the left side of the printer. That should take care of the cable hanging issue you're having.

[vette]

I have the same Kobra 3 Max Combo and use the 5 filament/cable holder that comes with this and don’t have the cable issue you have with your zip tie setup. The cable holder slips into a notch on the left Z axis strut and works great.

[lixnix]

I have for my Kobra 3 a poop try with a small system that prevents the poop from flying around, will print something for it for my Kobra 3 max too once it arrives.

[CallThatGeek]

You forgot to install the PFTE and cable holder that goes into the side of it.

[anilomessej]

Has the software been updated since you made this video... im looking at getting that exact setup

[Johnny_blacklotostudio]

thank you so much for this information! I want to get one and I wanted to ask you what is the total size of the plate at the end of the stroke both in front and behind? I would like to have the measurement to understand where to place it given the dimensions, thanks!

[finnsime-nf]

hi i doubt you will actually try this but can you please try to put the kobra 3 pro head on the kobra 3 max i want to buy the base kobra 3 head for my kob 3 max but dont know if it will work

[johnhagerty]

I had heard that they did updates for the software/ Slicer with Cura is it true I would like to get a large printer for Helmets, The only printer I have is a Prusa Mini Plus Thanks

[r.stoecklein]

What kind of nozzle is in this machine?
Are there already options for hardened 0.8mm?

[thc_temple]

Do a video showing a multicolor print!

[Rmharnisch]

Hey! Im consodering buying one. How much room do I need from front to back? Bedsligers need more room in the Y-direction so please incluse the measurements when the bed is fully in back and fully in front. Thanks!

[bcjan]

Use .3 nylon filament about 2-3 feet to hold the wires attach it to the end of the z axis bar, print a piece to hold it and the filament at .3 will hold up the ptfe and wire while printing.

[joelitotek]

you my friend earned a sub.
ive been looking for people talking about this printer and nothing!!
not even the big creators which is wild to me.
keep posting my friend.

[Cryostatica]

How’s the speed on the Kobra 3 max? I loaded up one of my files in Anycubic Slicer Next and compared it to the Kobra 2 Max and it’s significantly slower (K2M being more than 50% faster) in the slicer, which feels ridiculous for a newer machine.

[JM-qzik]

I'm excited to hear what you have to say . . . but it took 2 minutes to share the first piece of information. TLDW

[charliebreitenmoser]

should i get the kobra two or three? i dont care about multi color prints at all and just want to print big things like armor and helmets for cosplay, please let me know what would be better for me

[Thewithlogic]

2 prints and now the head unit tries to drive itself through the bed, the tech support won't respond.

[raypalmer]

To better manage the PTFE Tubes and the Power/USB Cable, you need to print a small 'Support Blade or similar which has a hole on one end and a larger hole on the other like a Spanner for which the tubes/Cables can go through. The Top of the Gantry should have at least one screw which can be undone and then mount this 'Blade' which can better manage these cables.
I did this to my Kobra 3 as my combo had to be put on the top of my enclosure leaving the Orange cable dangling which ended up being 'nicked' by the cutter as it got caught there.
See my video here:
Also my enclosures help with ABS printing which I am primarily at the moment using.

[FrostyTeeVee]

That table doesnt fit that properly, you need clearance for the belt to fully extend to the back with room for the cable

[ryansessions]

so....your printer should've came with a piece that fits on the left side to hold your pfte tubing to keep it out of the way from the prints....double check your box before you throw everything away