Shigiya GUA-30-150 OD GRINDER

Check out our website for more information:

12" x 59" Shigiya (Made in Japan) High-Precision Universal I.D./O.D. Cylindrical Grinder
 
Model: GUA-30-150       S/N: 360032          New: 1986
 
Capacity
Swing over table:                         11.8"
Distance between centers:                 59"
 
Wheelhead
Swivel range both right & left sides:     30 degrees each way
Spindle speed:                            1,563 R.P.M.
Max. Stroke (manual):                     6.9"
Rapid travers (hydraulic)                 1.6 I.P.M.
One revolution of handwheel:              0.04"
One division of handwheel:                0.0001"
Plunge cut infeed speed, inf. variable:   0.0008" to 0.006"
Traverse cut infeed speed, inf. variable: 0.00004" T0 0.004"
Number of selectable grinding passes
  before sparkout:                        0 to 30 Times
Range of Spark out duration:              0 to 30 Seconds
Grinding Wheel Size (OD x Width) x ID):   16" Dia. x 1" to
                                          2" Wide x 5" Bore
 
Work Table
Speed:                                    2 to 118 I.P.M.
One revolution of handwheel:              0.787"
Swivelling Range:                         7 Degrees CCW
                                          1 Degree CW
 
Workhead
Taper of Work Center:                     #4 Morse
(7) Spindle Speeds:                       29 to 363 R.P.M.
Swivel Range toward the grinding wheel:   90 Degrees
Swivel Range toward the operator's side:  30 Degrees
 
Tailstock:
Taper of work center:                     #4 Morse
Quill Stroke:                             1.2"
 
Approx. Dimensions:                       146"L-R x 67"D X 60"H
Approx. Weight:                           9,000 Lbs.
 
Equipped With:
Swing down I.D. Grindning attachement with I.D. grinding spindle
Hydraulically actuated longitudinal table travel with
  wheelhead fed at either each table reversal or with the
  table stationary at the left or right hand side
Automatic grinding cycle for plunge or traverse grinding
  operations including hydraulically actuated wheelhead
  rapid approach and retraction, coarse and fine grind
  to pre-determined stop, and individual spark-out timers
Universal motorized workhead with combinatation live/dead
  spindle
Tailstock
Table swivelling angle measuring device
(1) Grinding wheel mount
External coolant pump and tank
1 HP 3/60/230-460 volt external Hydraulic Pump Motor & Tank
5 HP 3/60/230-460 volt wheelhead drive motor
Machine is wired for  volt operation
 
Special Note:
This machine has been thoroughly serviced by our staff.  The machine has been  
 disassembled, partially repainted, cycled and is ready for immediate delivery.
 
** Superb Condition & Appearance **
** Inspect Under Power in our Harrison, NJ Warehouse **