Disc Brake Conversion Kit | 1965-1966 V8 Mustang | Project Betty

Let's install this conversion kit from CJ Classics! We'll walk you through it step-by-step, and share our tips and tricks along the way.

#BrakeInstall #ClassicCar #CarBrakes #HowTo

Get this kit:

Subscribe for more info and installs:

Music Provided By:

[amaturedrifters]

Hey guys, thank you so much for these videos. Ive bought your 4 wheel disk brake conversion kit and installed it in only 4 hours thanks to your video. Now im just waiting for the video that shows how to install the e-brake and how to bleed the brakes.

[omargarcia]

looking forward to the E-Brake Video! Currently installing my kit and I could use a little help

[anthonylancaster]

love this series. Almost everything I've been thinking about doing in the future is being done so I get a good idea of how difficult it will be. Nice job guys

[josephgorge]

When is the e-brake part coming out? I’m installing this kit but I’m stuck on the e brake installation

[PM-zhfq]

When are we going to get the E brake video you mentioned.

[agentfox]

It is a pity that a very important part is missing. How is the new proportional valve connected to the hard lines, which have a different length and shape and are not intended for this combination?

[charliefrey]

I really need that E-Brake video. I am stuck on that part of the install right now.

[kdog]

Where is the "future video" for the e-brake hook up?

[antartorres]

Thx for your videos, how much difference will be on a 1966 6 Cylinder 3 sped manual ?

[orangesharpy]

Great tutorial I really appreciate as I am planning on doing this on my 66 soon. On a side note why does every automotive show have the generic blusey/roadhouse background music?

[tartarus]

I noticed it's been a year and there's still no e-brake video. Is it because that the random assortment of parts that come with the kit don't actually work? The instructions say: "The parking brake cables are supplied to bring you to a central point, It (sic) is the customers responsibilty (sic) to tie the cables into the system!" but I can't seem to find any combination of parts (new or old) that can connect the Eldorado single piston calipers "using the front and middle sections of the original drum cable setup". A new video would be very, very helpful.

[tobiasbuller]

Hey guys! I’ve got the 1965 6 cylinder with 4 lug wheels at the moment, is this kit suitable for that set up too?

[TaraJones-xc]

Is the short throw adapter sold separately??

[Just_JoshE]

9:16 My front disc kit came with races inside the hub and races on the bearings. Do I only need the races inside the hub? My inner bearing can still move between the race and grease ring.

[Tapster]

Will this kit fit a manual transmission? Video stated Automatic. If not is there a full wheel disc brake conversion kit available?

[WatchNFLNetwork-mw]

I am looking to convert 4 drums on my 1965 Mustang to disc with new master cylinder and a booster if available. If this is not a good set or kit anyone have experience with another kit? I have v8 front spindles and my rear axle offset measured 2 1/2 inches so I believe this is a 9" axle.

[benharper]

is there a limit on using the stock size 14/15 inch wheels or will you have to go to 16/17 inch wheels?

[kevinbowman]

I need a kit exactly like this but for a manual, is there anywhere I can get one?

[xXBurntBaconXx]

Are there individual part numbers for each caliper, pad, and rotor? I want to make sure I can order parts and grab them off the shelf if I'm ever on a road trip and have an issue.

I've been avoiding Willwood/other high performance brakes because no parts store carries their pads/rotors on the shelf or in the warehouse.

[jamesburkhart]

Will 14 inch rims still fit with this conversion i have a 65 falcon want to do this