Garmin 200-kHz and 50-kHz Transom Mount Transducer Kit-15-Degree Beamwidth

Garmin 200-kHz and 50-kHz Transom Mount Transducer Kit-15-Degree Beamwidth

Manufacture #: 010-10272-00
GARMIN TM TRANSDUCER DEPTH AND TEMP FOR GSD 21 22 AND OTHERS
Fairing Block Included = None | Frequency = None | Mounting Style = None | Pins = None | Speed Included = None |
Temperature = None | Beam Width = None | Cable Length (Feet) = None
Plastic, transom mount transducer with depth and temp. Operating frequency of 200 and 50 khz. Beamwidth of 10 degrees at 200 khz, 40 degrees at 50 khz. Transducer kit comes with mounting hardware and installation instructions.
Top reviews from the United States
Perfect replacement!!
This was purchased to replace the original transducer that came with my Garmin GPSMAP 441S. I didn't properly tie the boat down in the slip,..and with the rocking action,..the transducer was sandwiched between the pontoon and the piling, snapping it off the mount. Now, as I mentioned it was mounted on a pontoon boat,...so this secenrio may not be of any significance on a typical hull boat since it's normally mounted along the center of the transom.

The mount can obviously take some damage as it was unscathed,...but the transducer's mounting locations are pretty thin and flimsy. Now, my old transducer still works, so it can obviously take a beating. I just need to find a way to mount it, since the connection points are broken.