How to Configure Cisco ASA Transparent Mode (Version 8.4 and Later): Cisco ASA Training 101

preview_player
Показать описание
Рекомендации по теме
Комментарии
Автор

Thank you. This is very clear and well conversed. Appreciate the effort!

kekecoo
Автор

Thanks for your comment. There's no need for an update. The steps are exactly the same in 9.1(1).

soundtraining
Автор

If I have 2 computers (A, B) connecting to a same switch C (for example) the switch C connect to an ASA with Transparent mode turned on. Will packages send from PC A to PC B or reverse get scan by the firewall? Assuming, that i have all access policies (access-list)setup in the firewall. Thanks

phongtay
Автор

How do you setup DHCP on inside subnet on Transparent mode? is it possible?

baraaabbas
Автор

Sorry Don if I had puzzled you. I have tried natting, static routes, and ACL just to get outbound to non-secure network couldn't get icmp working and it seems to me the packet get drop or mismatch according to debug ip icmp. PC to ASA and back network 192.168.10.0/24 is good but PC to VLAN 2 ip 200.0.111.1/24 can't ping also PC to dmz ip 172.16.0.1/24 can't ping. But ASA to outside and dmz no problem at all. I'd like to watch your video to escalate these kind of problems Don, do you have any?

robertwise
Автор

Hi thank you for the video.
Regarding the dhcp at the end of the video, if the dhcp server resides on the outside, wouldn't stateful inspection allow the dhcp replies back through the ASA from outside to inside?

anthonyg
Автор

Thanks for the video - that helped me a lot.

anonymouse