Enable WDS Bridging and Wireless Router WDS Wireless Distribution System TP link | wifi repeater

preview_player
Показать описание
how to Enable WDS Bridging | HOW TO MAKE Wireless Router WDS Wireless Distribution System TP-link
1. Login in TP-link TL WR740N
2.Change The ip address of TP-link Router
(NOTE: 192.168.0.1 Change it into 192.168.1.150)
3. DHCP Sever DISABLE
4. Survey The WIFI
5. Enter the wifi password

Configure the Range Extender
use old wifi router as a wifi extender
Рекомендации по теме
Комментарии
Автор

This is by far the quickest and the best WDS tutorial I found

imnotpathetic
Автор

You can't fathom the enormity of the hatred I have for instructional videos without narration.

gosnooky
Автор

Thank you very much.
I have been finding this solution for many days or you can say from a lot of months.
Thanks really.

abhishekuikey
Автор

Don't forget to update your forwarding modem/router to a static channel. In this video it's channel 3. If your initial modem is set to automatic channel selection this won't work!

frankmom
Автор

This was helpful for second time to me

EhsanSajjad
Автор

Hi, I can't find the option "Wireless - ENABLE WDS" Can you help me to solve that issue. I can't use the SURVEY option for the Repeater config.

warcoglobal
Автор

i can connect to my wireless access point thru one of my computer only but my other devices cannot eventhough ive keyed in the correct wifi password.Im using TPlink D9 as my wireless access point. pls advice

sholto
Автор

just add one more thing, after you finish the 5 step... you must disconnect wifi frist, then connect it back... is working for me, wifi stable but speed is same... better then before

dekhannwong
Автор

After disabeling the DHCP I am unable to access my router setting through login ip.. when I reload setting page then it shows nothing. What is the solution ?

FarhadZafar
Автор

Once my main router internet disconnect then WDS not connecting to main router automatically, we need to click survey button again, and I need to join laptop and WDS router through LAN cable, is there any way to access this repeat process through mobile so I don't need to connect laptop every time to router ?,

alpeshm
Автор

Hi, I don't know why do i have problems with WDS bridging I used to do all the same like always . but now I see a message that chanel can not be in auto mode when WDS is enabled. its not the first wifi its also where I live

J_T
Автор

Disabling DHCP I can't connect to my router

Yuvraj_UP
Автор

managed to get it work for 2 minutes and dc every two minutes and takes several tried to connect.
not sure why
is it because my primary router had 2.4 and 5ghz on?

acaftermath
Автор

is it not requested to activate Bridge Mode? So what is Bridge Mode used for?

mircobandini
Автор

Can we use DHCP using same IP range required by main router that's sharing internet?, So we can easily access router settings on mobile through password, without connecting laptop through cable

alpeshm
Автор

Well the wifi works now. But can't access the router page now with 192.168.1.150. Keeps saying the site can't be reached. Any solution?

khalidian
Автор

Bro i have the same router as you have for repeater but when i disable DHCP SERVER it gets stuck up on obtaining ip address and cant connect with my phone plzz help

jesalmachado
Автор

laptop from which i bridged tp link TL-WR740N modem gets connected and run internet but my phones cant get connected with modem. can any one solve this problem

ahsanmughal
Автор

That last part with going to Properties > Security on the newly created WiFi lost me. I am on Win 11 and I cannot find that option. :/

ygreq
Автор

Do you have to change the ip address if the main router's ip address is different?

CoolDude-eitz