ToolkitRC M6 Field Charger | Review

Every Subscriber Counts! Help support this channel and Subscribe Now. Click SHOW MORE to see the links mentioned in this video.
Check out Banggoods 13th Anniversary Sale now through 9-12-2019

Links mentioned in this Video:

Current R/C Deal codes:
7% off for RC Vehicles
code: Vehicles7

6% off for RC Drones
code: Drones6
end date: 12-31-2019

8% off for RC Parts
code: Parts8
end date: 12-31-2019

Help support the channel please check out:

Social Channels:

#bangood13th #ToolkitRCM6

[TheQuadcopterReview]

Every Subscriber Counts! Help support this channel and Subscribe Now. Click SHOW MORE to see the links mentioned in this video.
Links mentioned in this Video:

[antigravity]

The problem with the M6 and M8 is charger, which it balances during the entire charging cycle. This is not necessary and therefore the charging process takes much longer. You can see it, if the cell number is highlighted, then the voltage value is frozen during balancing. Battery packs that are connected without a balancer will not be fully charged. I can not recommend the device for charging. The device should charge without balancing until the battery is almost full, and then balance. This is what all my other chargers do (ISDT, HOTA, ...). I do not use the device for charging, but only as an adjustable voltage source.

[johncarold]

What's great about this charger is I can hook it up to my 24 volt line of my wheelchair and charge up all day. Thanks again for the information on this Charger .

[Rich-TeaFPV]

I think this could be my next charger 😁

[slevehn]

its a great charger! ive been using it for my 5 inch packs.

[Fpvfreaky]

I was the first to like and not the last to comment 😁 good to see you again here bro.
And that goes for everyone els that reads this comment🤘😎

[MCsCreations]

Really nice charger, Pepe! 😊
Great review!!!

[unnamedchannel]

Mom says come over to the yard and do a review.

[CndleJck]

If you have an old laptop power supply or something similar with the right voltage, then you can replace the plug with an XT60 and use that as your input.

[TomSwango]

I do not understand why my M6 will only discharge at 600ma even when it is set to discharge at 2 amps. Does anyone have any thoughts or suggestions?

[paulm]

I am confused i purchased the m6 on justins review at dronecamps because he shows you can actually use a 10, 000 ma power bank but his review is a good few months later? Did they update the m6 to use power banks or am i missing something pepe?