MIKA3D Gold Silver and Copper Silk PLA Filament Prints Using the CR-10 and MP Mini Delta

Check out my new Video!

Mono Price Mini Delta

#Monopricedelta#3Dprinter#cura#MIka3d

If you enjoy Videos like this consider donating to my Patreon Thanks !!!

[method]

Printed out a 1/2 scale bender from futurama in silver looks amazing

[technodrone]

Blew through a kilo of copper around the holidays. I love this stuff.

[iviaverick]

the silver looks great! Planning on printing a full set of Mandalorian armor for cosplay and this has the perfect look

[paulreeder]

I am partial to Geetch's PLA and Silk PLA filaments. They just work!

[clotr]

Your brittle print seems to be caused by under extrusion (too low temperature, or to fast printing). And the inconsistencies in the second print seems to be inconsistent temperatur in the room where your printing, draft or something causing under extrusion in parts of the print because the heater can't keep the nozzle temp up if it is also fighting the draft.

[ThomasGrillo]

Very cool! I had no idea there were metallic filaments out there. Thanks for sharing this.

[kevinprice]

Thanks for the review. I was very curious about these materials.

[bnn]

Great video dude. I just got this same set and am having issues with the silver, this video helped. Thanks!

[D_Printing]

Fine threads well done, great colours

[Fpvfreaky]

Love em mate they look wicked, 👌😃 think the gold and copper look great together . I was looking for silver the other week wish I’d seen your vid first, thanks man for sharing 👍🏽😜🍻

[Thomas]

Thanks for the quick tips. I had this same filament delivered but haven’t printed with it yet. So, 220/50 is sounding best at the moment. Any other opinions welcome.

[kevinthompson]

Currently printing a very large Kratos statue (3 day print) in copper. And it looks amazing so far.

[raymonddelgado]

I can not get the setting right for the monoprice right at all. Any suggestions?

[gunfighterzero]

turned out pretty good, did you ever settle on the right temperature?

[renegadebiker]

I have the red, white, and blue metallic filament. I have made a dragon and a bulldog with the red metallic filament, and a dolphin iPhone holder for my nephew's wife, Sarah. I have yet to print the white metallic filament, but I think I will use that one for a snow background environment interlocking shelf for both G I Joe and Cobra in my glass showcases that you can see right now at both playlists of "G I Joe Collection", and "Cobra Collection".

[Sifu-Myers]

Would you mind sharing your slicer settings? I can't seem to get such clean prints with any material. They always tend to just look weak and usually are haha. I'm going for a good strength to asthetic ratio. Great video by the way these exotic materials are super interesting

[gtcorpteam]

I would like to see the result of this 3 colors or only one with passing it under acetone vapor. It could be interesting rendering after, if that can eliminate some issues!
Great videos The Casual Creator

[lostinseale]

Looks good. I am planning to print. Aztec gold coin coasters for my backyard pool them. Going with a Pirates of the Caribbean theme. I was hoping to find PETG but PLA will have to do.

[deeareus]

if you use simplify u can join all the finish layer on the same place ;)

[xKatjaxPurrsx]

I'm gonna throw out a guess that the diameter of the filament is inconsistent leading to some areas of underextrusion which creates those bands.