Mercedes OM617 Rebuild - Part 22 - Injector Rebuild, pop test and Install

►Click below to purchase hats and shirts.
► Please become a Patreon member to help support making these videos.

[santiagoescalambre]

you are the best mentor so far in my book. you did not leave anything behind well explained in full details, thank you so much. GOD BLESS YOU.

[schwartzenheimer]

You're really doing great here. I learned a ton from there videos. Thanks for taking the time to make them...

[Hannes-dghx]

Great videos, keep up the good work! I'm going through similar steps on my om617 and learned a lot from you.
All the best from Germany!

[Bodeesafa]

Love these videos my man, good shit. 👍🏼 wish I coulda bought you a tripod before you filmed all these

[louisbattle]

Hey John I just did this yesterday with my 300 SD I did not have the Monarch tips to replace the Bosch tips because that’s all I could find at the time vehicle seems to be running much better. I have really enjoyed your videos on the 617 I just replaced the head and Believe me it has been a challenge I consider myself a good mechanic.

[kermets]

Hi...Great video you have a link to download a free copy of the FSM ?
regards Brett

[Keeferlgb]

Thanks for the video. I'm about to do this job on my 240D and 300D. Where can I buy that W123 field manual you were using...and does one manual cover 240D & 300D?

[louisbattle]

There was such a huge difference for me between the 82 and the 85 injectorBarrel but I don’t really see that would make a difference but it’s really interesting to know why they changed it

[vitospogis]

The heat shield has a groove on top part because it has to fit nozzles that stick out just a bit and
when screwing what should sit is the housing on the shield, not the nozzle or would damage it
So before setting the shield into the motor test it on the injector to see if it sits properly
if it doesn´t it will damage the nozzle and get full of carbon .

[lukaduspara]

Is it okay to put more than 1 shims together, to get the right pressure. Or only 1?

[johntousseau]

I did this a few weeks ago on my W116. It gets better fuel economy and has more power. Number 5 is leaking though so it has to come out so I can lap the pieces again.

[teymurakhundov]

Where did you get the washer shims from?

[mikki]

all that work, kit is about what 450 ? injectors? you can get brand new injectors from bosch for 650 shipped from germany

[ricardocenteno]

Great videos what was total expense to redo this engine on your own

[nitrofish]

Nice video but you need to get a tri pod to hold your camera

[kubaSWAT]

Hi, where to get shimms for OM606 injectors??

[louisbattle]

John there is such a big difference between the injector chambers diameter of the hole going into the block between each year it is really confusing

I dont know where I have to buy de washers. If go to the Mercedes or hardware store. thanks

[tydale]

Why did you lower your injectors pop pressure?

I'm asking because I just increased mine the other day to 2, 000psi.

Can someone tell me the meaning: " the diference between any two injections nozzies within one engine not exceed 5 bar positive" thanks. Second, my pression is 115 + 8, whats is meaning? I imagines the meaning is inyector can arribe 123 bars? thanks