LK flexible film Screen Protector installation video for Note 10 / Note 10 Plus

[seemack]

Longest process I've ever had for a screen protector, but I must say this is the best installation I've had, especially because I got it on the 1st try. No bubbles! I can see the line around the edges of the phone, but I'm good with that. Hopefully it protects well.

[agarite]

I just gave this a go on my s10+. It was a seamless process. It's very straightforward and as long as you follow directions it'll come on nice. the real test is to see how long it will take for me to run through all 3 of these! This is a steal since it's a pack of 3 with warranty.

[makmelaf]

Just bought a new Samsung S10+ and read that this protector was recommended due to the fingerprint sensor on the front of the screen. Ordered it and it came today. After reading some of these comments I was sure I was going to have problems putting it on. I watched the video a couple of times then played it step by step while I was installing it. Everything came off without a hitch and it looks good. I don't see any line on the screen and there are no bubbles. Thirteen steps is a little intimidating for putting on a protector but it worked out fine for me.

[rr-phkx]

The best help is to look for a video with your exact phone model as some of the tabs differ per device...first time worked flawless after watching a few times....will be buying these for future devices

[vivaldi_is_dreaming]

Used this guide for a OnePlus 7 Pro, worked flawlessly. Just watched the vid once, then restarted it and followed step by step. No problems at all! Works really well with my Spigen case, also.

[TheRealChamp]

The "Tab 2" step isn't explained clearly. When you peel back Tab 2, you only need to peel it back to the middle of the phone, then you'll squeegee from the dotted line which will allow the 'Anti-layer' to get removed. With Tab 3 you will also only peel it back to the mid-point of the phone. I screwed up the first 2 screen protectors by not understanding this step so I'm glad this came in a pack of 3. Also, there is a noticeable horizontal line across the middle of the screen when the display is off, I guess a seam of the protector. It's not THAT visible when the display is on but I guess that's the tradeoff of a multiple-step application. At least there aren't any air bubbles.

[thoughtguardian]

Sometimes I come back to this video just to listen to that sweet background music and reminisce about how satisfying slapping this screen protector on my phone was.

Great product, would buy again.

[RpTheHotrod]

Worked like a charm. This also works perfectly with the
SUPCASE Unicorn Beetle Pro Series (S10 Case 2019) phone protector (like an Otterbox), as it has a small front covering that goes OVER the protective film and helps keep it down. I will note that the instructions where you first fit the layers on top of the phone did NOT flatten on my phone, even when pushing down on the white paper, as the entire thing sort of had a curve pulling away from the phone. Instead of a mostly "black" effect, it was all white (not touching the phone screen) narrow strip up and down the middle of the phone. However, upon continuing with the instructions, the end results ended up forming perfectly to the phone.

[benjaminli]

This comments section is divided into two sections - the people who just can't seem to figure it out and call the product useless because of their own failures, and the people who have figured it out and are relatively happy with the product. I just put the screen protector on successfully on the first try, and I think it's pretty great. The only problems I have with it are that it feels a bit rubbery instead of plastic-y, which I don't like. Also, the screen protector doesn't clean like a normal screen. If the screen protector gets dirty and I try to wipe it, the dirt smears instead of coming off.

Installation steps for the inept: When peeling off layers 2 and 3, only peel halfway, then invert (you should see a green pattern where you begin the invert) the plastic screen and use the "squeegee" to work backwards towards the edge of the phone, removing the layer with the green. It might sound weird, but it'll make sense when you try it.

[coppergearheart]

Using the squeegee to push out the plastic tabs 2 and 3 didn't work out for me. I just manually peeled the unnecessary plastic off after pulling it up half way, and then set it and removed the bubbles afterward.

[mschuexlittlechuex]

What if the screen protector u orders doesn't come w all that 🤔

[jamesweddle]

Kinda loving that background music....

[zenmototv]

This is by far the most complicated screen protector installation that i ever did. I thought it was tampered glass like my switch or gopro but its different. Anyway the result is still amazing in the end. I got 1 tiny dust in the far right edge literally at the veeeery edge and I am really bothered by it since I like it to be perfect, I tried to remove it but it became worse so I redid it, on the 2nd time I was faster but still a single dust came on the very edge in the upper part, but this time it didnt make a bubble so I can live with it for now.

Got it installed on my Mi Note 10 Lite

[megablue]

Just got this for my s10+. video is fine had no issues installing.

[JustChillingNahhhhMean]

Nice... had it on the first try and result (not a pro) is awesome.

Thanks

[kellirichins]

Followed the video step-by-step and would ya look at that...even with my crap shakey hands, I didn't screw up! Nice. :)

[elizabethpanagoulias]

good video, seemed to work fine as instructed....great video

[DreamBoyDead]

I had a really hard time with tabs 2 and 3! Ridiculously hard time I messed up first 2 tries and then my 3rd attempt I nailed it, it's tricky to pull the tabs 2 and 3 I was confused on how to do it, I will be contacting support to get another replacement since I wasted 2 screens already

[YouAreBreathing]

I made the stupid mistake of just reading the included instruction paper that came with this screen protector. After learning by doing I successfully installed it (the most difficult part was aligning the screen protector with my phone's camera cutout). I somehow got dust under the screen protector, but luckily it came in a three-pack, so I get two more chances.

It works so far, so if I manage to scratch this screen protector, I'll just install the other one.

[sarahfreytag]

Worked (step 4 wasn't easy) but it has an unsightly line down the middle of the screen.