OPEN SMART 2.0 INCH Breakout Board for Arduino

OPEN-SMART Store:
This is a 2.0 inch TFT LCD expansion board. This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller.It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is less difficult.
With GPRS module, you can design your Ar duino phone.
With NFC reader module, you can create access control systems with the photos show.
With voltage and current sensor, you can make oscilloscope.
- Can use it directly to display characters, graphics and BMP format images.
- Compatibility: Because the logic level is 3.3V, it is compatible with 3.3V Ar duino board, you generally need to add a level conversion circuit if you use a 5V Ar duino Board ( UNO R3 / Mega2560 / Leonardo).

[fernandoraulino]

The link to Docs in Google Drive is not available.

[altrimenti]

Hello. I am using touchscreen with R61503 driver. How can I change the wiring to Arduino? For example i want to connect DB7 (Y-) to second digital pin on Arduino. Thank you in advance!

[carlozousa]

hi there. I have a 2.2" tft with the ili9225 driver ic but something's wrong on my setup. the touchscreen reports correctly on the serial output but all I get is a white colored output on the lcd. all the connections are done as per .ino example except the rd pin that needs a 3.3v and the arduino uno r3 only has one. Can you help? thanks

[marcoverstege]

The example of LGDP4524 is not available from the Google Drive folder. Could you please share this too? I have difficulties to get the screen to work.

[brayanarevalo]

Hi ! you could share me acces to G-Drive folder ! Thanks ...

[gregorybustamante]

me sae acceso denegado pedir autorizacion

[flamelios]

Hi there, can you please give us access to the drive ?
(Or authorize me)

[xKUMAxMU]

problem, white screen.
shows only when I press the reset button

[frankiechu]

Maybe you have update the UTFT library from Arduino IDE directly or you have two UTFT library in your Arduino IDE, please check it.