How to reverse a Samsung Refrigerator Door | Samsung UK

Find out how to reverse a Samsung refrigerator door in this step by step guide.

[alexgreen]

Useful video. Far better than paper instructions, but still took me 2 hours.

[CEREBROBELFAST]

Just did this and I'm happy to say it was as easy as the video made it look, it took me about 45 minutes. For people asking about the gasket, that part is really simple, if you're not sure you can even pull the gaskets off and check this step for yourself first before you begin on the doors

[dinara]

Please don’t forget to replace the “door closing sensor” as well, the video doesn’t show at 4:40-4:50, but there is a sensor and if you don’t place it correctly THE BEEPING SOUND (as if the door is open) will continue while the door is closed. The sensor should be closer to the turning point.

[davealger]

Good video all apart from the plastic cover for the top door hinge, which ever way i tried to get it to fit, it would not sit right, ended up cutting bits off it

[djhubba]

This was pretty easy... didn't need to drill like the others are saying.. just poked through the very, very thin plastic covering with an ink pen... easy peasy.. All the extra parts were there as well...

[LS-hqqe]

Well that looks like a bloody nightmare

[WarpDump]

I have a samsung fridge, the door magnet no longer connects, so i guess the best option is to just switch the door over to the other side, however I am fairly sure I had another part which was mirrored the top part on the door, but not sure, can you use the same part or do you need a new part for this which is mirrored ?

[grzegorzowczarek]

Samsung if you are going to do instruction video then DO NOT MAKE CUTS IN CRUCIAL MOMENTS. I'm unable to fit my cover on upper hinge and on 6:08 mark you made a cut and this cover magically appear on the spot. How did he fit it there? Maybe I'm stupid, but I'm ok with that as long as you provide USEFUL video instruction.

[torgemartens]

It's stupid that you have to tilt the fridge. The bottom hinge should be changeable from the front. Samsung please improve the User Experience of your fridge products. The reversing process is terrible and unthought.

[surina]

We bought the US version of this and at 4:06 when they are screwing in the hinge -- ours has no pre-drilled holes! LOL. Guess no one QA'd before it left the factory. We even bought two of them as they are convertible freezers or fridges. Both have the same exact issue. aye yey yey

[KarenSampogna]

Do you need a separate plastic cover top door hinge for the other side, or can you reverse to one that comes on the other side?

[Alex-ksbj]

5:18 i dont understand exactly how to reverse gasket and i dont find anywhere this step

[tobiecusson]

Good and helpful video although makes every step look much easier than it is. My fridge also doesn’t have drill holes in the bottom of it on the desired side so I’m having to improvise and drill my own. Very disappointing.

[greyMDA]

why switching the gasket? thanks for the tutorial

Yeah 2:46 is where I decided not to do this...

[dangercatt]

One question, how do you have a reversed cap @6:10? Mine seems to fall on the bottom part when reversed, which doesn't fit anymore? Am I being stupid?

[arthurfnshelby]

Why not assemble the top door while it’s lying flat?

[Not_Eph]

Why does the gasket need reversing? Whats the point? How does it work, i need to know

[fiaf]

So this fridge has been designed to be reversible. What do you do with a fridge that’s not?

[c_karamanidis]

It should be mentioned to which models this video apply. Not all models (in fact very few) support door inversion.