Workhorse Allison Transmission Range Inhibit Dash Light is On Along with Gear Light RV Won't Move

Workhorse Allison Transmission Range Inhibit Dash Light is On Along with Gear Light RV Won't Move and you stuck where you are. This may help you do some trouble shooting of your own This applies to the Allison LCT1000 or Allison 1000 and Allison 2100MH
How to reset a transmission control module Chevy.. For Allison? Not sure but worth a try
Step 1: Turn-key position.
The first thing you want to do is place your key in the ignition
and turn it twice so all of the lights on the dashboard illuminate. ...
Step 2: Foot on the gas pedal to the floor. ...
Step 3: Turn key off and release gas pedal. ...
Step 4: Wait 5 minutes
Step 5: Ready to drive.??
Next disconnect engine battery for 5 minutes to see if that clears the error code so you can drive away.
Scan Tool

[glocksm]

Thx Kevin. You're the man ! You're information is always invaluable !!!
Scott

[The.Frugal.Retiree]

Thanks for your information. This happened to me. You saved my day!

[steelheadstalker]

Have you ever had the jacks get stuck down? I had mine not retract last camping trip I had to manually retract. When I got home I drained and filled the system but the warning alarm still rings I can't figure it out.

[GT-mnbx]

For Most with "Range etc etc" on the DIC, before you spend a bunch, unplug and replug the electric ignition box under key. If no good, , swap out the 20-30 dollar electronic box for the ignition key. After that, you can try swapping the neutral safety switch on side of transmission. About 150 bucks from a big rig dealer that sells Allison stuff. 1/2 cost of car dealer. Ask me how I know. 99.999% chance it's the key ignition box. The key only turns those gears on that box.

[hojermontoya]

Que puedo hacer así tengo un bus que no arranca

[jodydewey]

Do you have an email? I have questions