PTR 9C Vs. MKE AP5 Which is Better?

I love them all the same! But PTR trigger are slightly better.

#ptr
#mp5
#mke
#ap5
#mp5clone

[KevinMcMullen.]

I have had 2 Zenith's, 2 PTR's, and an HK sp5. I bought the Zenith first really liked it but sold it when I bought my SP5 mainly because I didn't need 2 of the same gun. However I think the Zentih was fine and don't think the SP5 is worth the money unless you are a collector. I bought the PTR because it is compatible with my registered sear pack lower. So far I have put exactly 1k rounds through the PTR9c on full auto and only had 3 light primer strikes which were during the first 500 rounds. I will be selling the SP5 for the same reason I don't need 2 of the same gun. Any one is fine for the average shooter. The Zenith/ AP5 and SP5 are perfect out of the box the PTR will have quality control issues out of the box both of mine did. That's my experience with them.

[ADAMKRO]

Really well made video, thank you. You've helped me make up my mind.

[michaelfabian]

Amazing video and comparison! Thank ya Sir!

[Slotcarking]

Glad you pointed out the welded sear block on the MKE. Assume most guys with a registered sear pack will lean twds the PTR.

[koolnick]

Appreciate the insight sir, great content.

[Bear]

Great comparison and break down. I’m stuck between the PTR and the Zenith

[choke]

So VERY cool brotha!! Love the freedom! (While it lasts anyways!)

[Slotcarking]

The SB Tactical telescopic brace requires Dremeling out the inside cavity so that it will fit the rear of the PTR also. If that’s not accomplished, it’s a pain in the a55 to try to use a plastic mallet to force the SB Tactical brace onto the rear of the receiver.

[caseysmith]

Fantastic
! Been wanting to get this question answered

[vyoufinder]

The MKE uses the same metallurgy as the H&K as well as the same tooling/manufacturing equipment and techniques. I'm definitely in the minority as someone who does not think the H&K is better than the MKE. I do not think there is anything inherently better about German manufacturing; and to the contrary, my experience has been that it is worse. I chose the AP5 because I have bad luck with German made stuff, but think the SP5 is the best roller delayed blowback.

The PTR is not necessarliy the same steel as the MKE or H&K. The welded on rail is a pain in the pinky. Tolerances may or may not be good, and parts may or may not interchange. Cool if you're going full auto, but not the same gun.

[HUNTERSCOLO]

Sb isn’t tight, more towards the ptr not being quite as good quality as the mke. All HK tooling on the mke and lack of welded pic rail makes it a better choice for a lot of guys

[VforVendetta]

neither.. Spend a few dollars more and get the real thing. Its like buying a replica of a ford pinto. Just step up or buy airsoft if you cant afford it. Both of these are trash at best and you get what you pay for.