LS-DYNA - Preloaded bolted connection failure

preview_player
Показать описание
Preloaded bolted connection failure
  1. Simu-K inc.
Рекомендации по теме
LS-DYNA - Preloaded 0:00:51

LS-DYNA - Preloaded bolted connection failure

1D Bolt Modeling 0:04:49

1D Bolt Modeling for Ls-Dyna

Pre Load in 0:02:08

Pre Load in a Fastener explained in the simplest way possible - Pre-Load = Clamping Force

LS DYNA Tutorial 0:11:16

LS DYNA Tutorial | Bolt Pretension Analysis | Step by Step Tutorial

Bolt Connection Pretension 0:00:30

Bolt Connection Pretension | ANSYS LS-DYNA | SVS FEM

Quick Tip: Ansys 0:03:24

Quick Tip: Ansys Mechanical: How to Setup Bolt Pre-Tensioning Properly

Bolt Failure by 0:00:06

Bolt Failure by LSDYNA

Using Dynamic Relaxation 0:17:29

Using Dynamic Relaxation to Generate Preload in Ansys LS-DYNA

Bolt Type A 0:00:11

Bolt Type A

LS-Dyna - Cable 0:00:15

LS-Dyna - Cable element with preload

Ls-Dyna Blast Simulation 0:00:11

Ls-Dyna Blast Simulation

Ls-dyna and IdeaStatica. 0:01:00

Ls-dyna and IdeaStatica. Steel joint calculation

Bolt Joint Analysis 0:16:00

Bolt Joint Analysis | Bolt Torque| Bolt Load | Bolt Joint | Bolt Preload

Bolt Normal Stress 0:00:21

Bolt Normal Stress

LS-Dyna - Cable 0:00:37

LS-Dyna - Cable pre-loading simulation

#38 ABAQUS Tutorial: 0:22:02

#38 ABAQUS Tutorial: Modeling Bolt Pretension in Dynamic Explicit Analysis

Crashworthiness Simulations Comparing 0:00:54

Crashworthiness Simulations Comparing LS-DYNA and ABAQUS

Revolute joint in 0:00:51

Revolute joint in LS-Dyna

LS-Dyna - Failure 0:00:46

LS-Dyna - Failure analysis of a protecting structure

Expert LS-DYNA tools 0:04:03

Expert LS-DYNA tools - implicit tool

LS-DYNA EM: Tutorial 0:13:05

LS-DYNA EM: Tutorial for Metal forming application (Part VI)

LS-Dyna - Wheel 0:00:20

LS-Dyna - Wheel transient simulation

LS-Dyna - Rendering 0:00:15

LS-Dyna - Rendering of impact protection structure

LS-Dyna - Electro-thermo-mecanical 0:00:41

LS-Dyna - Electro-thermo-mecanical simulation of a fusible part

Комментарии
Автор

is this kind of twitching of the colored areas just an artifact of the simulation or does it actually occur in high stress scenarios?

bowwwh
Автор

dang, I just did a small project with bolt connection in Abaqus, not destructive but to analyse frictional behaviour. May I ask how contact properties between the bolt and nut were defined in this software? In the model I used, the bolt is merely a cylinder, and between bolt and nut, an Initial clearance called "specified for single-threaded bolt" was defined.

anhthiensaigon
Автор

Please make tutorials for all such solutions

mukulsharma
Автор

Can all y'all lower life forms please stop talking to yourselves around me .
Cause I'm listening to the elevator music playing on my conveyor belt traveling towards my SCALE.

ridlespriger
visit shbcf.ru