How To Paint Motorcycle Parts At Home - Like A PRO!

And below is the step by step breakdown for how to pain custom motorcycle parts.

Step 1. Clean the metal
Step 2. Sand all the surfaces
Step 3. Remove dust and wipe clean
Step 4. Make sure you have a decent protected area to paint in
Step 5. Apply first coat - sealer! Wear an organic vapor mask
Step 6. Apply the base coat #1
Step 7. Apply the base coat # 2
Step 8. Apply Orienting Coat
Step 9. Apply Clear Coat -2 layers
Step 10. Apply Clear coat - Flow coat

[reddog]

Came here to watch Ron Jeremy paint a tank, left having watched the most informative paint video I've ever watched. Great job!

[steve]

Love these "paint at home" videos guy is literally in a paint shop with decent gear and if not that's one hell of a paint set up.

[Lordturisas]

This was 100% what I was NOT looking for, but I watched the whole thing anyway.

[ashtonr]

I mean. I did it with a Rust-Oleum rattle can in my barn. It came out amazing but seriously be prepared to spend a lot of time sanding with various grits of sand paper. And then to spend the time waxing and polishing after you sand your clear coat. (And I mean like. A LOT of time. Days, weeks even. It's a work of patience if you wanna be cheap like me)

[traviscoles]

I forgot I had a professional well ventilated paint studio and spray gun in my house

[keithhampton]

Rattle Can Pro here. Motorcycle parts are great way to explore painting at home.I do intricate lace paint jobs on fenders and tanks.My pinstripe buddy makes it clean. Great Tutorial Mr Jeremy!! Love your work!🤘🤠🤘

[samazhar]

Thank you so much for letting us know and deeply taking us to the extra care while painting a thing!

[g]

TJ good to see you and hear you God bless you

[Yanmak]

DIY home paint setup: USD15.000
Painting tips from Ron Jeremy: priceless.

[atrautkpc]

Best, most professional, stupid-proof way to paint! Well done and thank you for being so descriptive and straightforward.

[MrSebaelunico]

Thanks for this video Mr Pablo escobar

[jameswillingham]

Thank you for this video, I am wanting to attempt successfully to paint my fenders and tanks for my Harley. Your video and your straight forward and down to earth instructions are awesome. Thank you!

[angelocolon]

Great, work like the way you handle the sprayer smooth and fast.

[StandGood]

Very helpful with all the paint types and information. Thank you.

[boomerpaschall]

Very informational, informal & well executed, thank you Mr Jeremy.
The lvl of attention to detail here is seriously appreciated though. Salute 🤚

[rumien]

It’s a courageous step to take on your own paint job. But, even more courageous to go on YouTube in those shirts 😊😊

[bigworm]

I DONT use degreaser or brake cleaner. I use water with alcohol mix (much cheaper) and then wax and grease remover made for pre paint. I always like to etch prime before primer even tho its dtm, or epoxy they say is best for full raw metal pieces. Nice vid tho I love to see diff ways people do things.

[fejimush]

Fabulous video! I've done some painting that's turned out fairly decent, and can tell with a few changes (based on this video) I could take it to the next level. Thank you!

[ndborn]

I and other professional painters will actually use Rustoleum etching primer. Works great. Great for bare metal. For plastic us their Primer with sealer.

[Lazarosaliths]

Great video!!! What about repainting plastic and metal parts of the bike? How deep they need to be scrubbed?