Parametric Wall Art Assembly

Welcome to our step by step instructional video guide to installing your parametric wall art from the french refinery. View written installation guide below.

What You'll Need:
- Phillips screwdriver
- The provided screws and Onefix connectors
- A stud finder (optional but recommended)

Installation:
1. Remove all pieces from the shipping crate, separating the wall mounting beams, vertical slats, and the mounting hardware packet.
2. Use a stud finder to locate studs in your wall for maximum weight support.
3. Secure the wall mounting beams to the wall at the desired location using the provided screws, ensuring they are fastened into the studs.
4. Insert the Onefix connectors into the holes on the sides of the first and last slats.
5. Press the first and last slats onto the corresponding assembly holes on the mounting beams; use a Phillips screwdriver to tighten the Onefix connectors.
6. Identify the numerical order of the remaining slats by checking the numbers written on their back.
7. Hang each of the remaining slats in numerical order from left to right over the notches on the mounting beams; no tools are required for this step.
8. Once all slats are in place, perform a final check to ensure everything is secure and properly aligned.
9. Your wall décor installation is now complete, and you're ready to enjoy your new space.