Wiegmann PBGX Series Pushbutton Enclosure

PBGX Series enclosures are designed to hold all standard brands of miniature oil‑tight pushbuttons, switches, and pilot lights. They provide protection from dust, dirt, oil, and water.

PBGX Series Features:
- Nema Types 12 and 13
- UL E64791; CSA LL66078
- Fabricated From 14 Gauge Steel
- Gray Polyester Powder Finish
- 1 to 25 22.5 mm Holes
- Continuously Welded Seams
- External Mounting Plates on Top and Bottom
- Grounding Provisions Provided
- Captivated Cover Screws Thread Into Sealed Wells

With respect to the usage, installation or assembly of any products described in this video, Galco Industrial Electronics, Inc., a Michigan corporation, encourages you to follow the requirements and/or guidelines of: i) the Occupational Safety and Health Act of 1970, Public Law 91-596, as amended, and all laws, rules and regulations implemented in relation thereto; ii) the National Electric Code®; and iii) NFPA 70E®. Any installation, assembly or work described in this video should be performed by a qualified licensed electrician.

VIDEO TRANSCRIPT:
Welcome to GTV!
Today I'll be showing you Wiegmann's PBGX Series Pushbutton Enclosure.
The PGBX Series enclosure is designed to hold all standard brands of 22 millimeter miniature oil-tight pushbuttons, switches, and pilot lights. They are fabricated from 14 gauge steel and finished with ANSI-61 gray polyester powder inside and out over phosphatized surfaces. They are rated NEMA 12 and 13 for indoor use, providing a degree of protection from dust, dirt, oil, water, and non corrosive liquids.
The enclosures have continuously welded seams ground smooth and a closed cell oil resistant neoprene gasket. The front has captivated cover screws thread into sealed walls, and for larger models there are internal detachable hinges to hold the cover open during wiring.
The enclosure has 4-way miniature pushbutton holes to accommodate for most pushbuttons, switches and pilot lights. The number of holes is indicated in the part number after the PGBX designation. For example, this model here is a PGBX6, which has 6 pushbutton holes. This other model is a PGBX1, which has only 1 hole. There are 9 enclosures available ranging from 1 to 25 pushbutton holes. There is also an external mounting plate on the top and bottom of the enclosure.