DeLonghi ULKA Water Pump - Repair | DeLonghi ECAM Magnifica S

In this video you can see how the ULKA water pump of a DeLonghi coffee machine can be repaired easily, quickly and inexpensively.

M Y P A Y P A L T I P - B O X
_____________________________

Affiliate links:
Bezahlter Link:

U S E D P A R T S
_________________

#Ulka #WaterPump #Repair

[austinado]

Excellent video! Thank you for making it. I just purchased an espresso machine that had been in storage for years. The pump would not prime. I used a plastic syringe full of water, to force water through those check valves, by removing the filter from the water supply hose, and putting the syringe onto the hose. (I got the plastic syringe from a local drug store by asking them if they had syringes for giving pets medicine. This kind of syringe has no needle.) After the pump was force primed, it worked, but the flow was very low. I removed the pump, and took it apart as you show here. I found that small 9mm x 5mm x 2mm o-ring was hard as a rock. I replaced it with one from the plumbing department in the local hardware store, and now the pump delivers a lot of water! Saved myself $45.

[stambetors]

I fixed the problem with my machine thanks to this clip. Thanks!

[dx]

Démontage détaillé et précis. Vidéo de qualité. Super ! Merci.

[bangdangough]

Thank you very much! I fixed with the help of your video our Delonghi Magnifica S. The little O ring was the problem.

[_nerko]

Thank you so much bro... Some heroes don't wear capes

[gravestonemyth]

Thank you. This was helpful in repairing my Gaggia Berra.

[maestro]

Ogromne dzięki za pomoc, dzięki Tobie mamy na święta kawę z ekspresu!!! :) Daję like i suba :)

[ogundemirhan]

Teşekkürler çok faydalı bir vidyo çekmişsin Türkiye'den selamlar 🙏

[robertjaszewski]

Dziex Bruder! Miło patrzeć na Twoje poczynania. Picie takiego espresso to sama przyjemność

[abdelkadersoultana]

Merci pour ta vidéo explicative, j'avais démonte... Mais mal placé le petit joint torique qui c'est déchiqueté ...lol ;-)
Cool tu m'a sauvé une Délonghi !!

[SylvainDaclin]

C'est validé également, très bon tuto 👏

[ChubChik.]

Спасибо за познавательное видео 👍🤝👋лайк и подписка 🔔

[gordonondis]

Hi, thanks for this video! Our Prima Donna was giving us this message. I replaced the o-rings in the water pump, it now makes coffee, although the pressure still seems lower than when it was working 100%. Also, the machine takes a very long time to switch between functions, i.e., from steam to hot water to coffee. I replaced the flow meter, that didn't fix it. I notice some air in the water line, how do I fix that?

[hass]

Professional and very helpful video (as usual!). Thank you!

[mahatma_manett]

Dichtung und Kugel getauscht. Das war’s schon. Vielen Dank 🙏

[Ramzi_Az]

Thank you so much for this awesome content, really helpful, worked 100%, god bless you 🙏🙏

[ci]

Can you please let me know rom where to buy oring and ball . Thanks

[hehen]

Bei mir war es der flowmeter / Wasserdurchflussmesser auf der Seite Richtung Pumpe wars verstopft. Habe es mit ner Nadel wieder freigemacht. Das Loch ist so klein, vielleicht 1.5x so groß wie ne Stecknadel.

[NicolaDiNisio]

Very good job, but set the machine for a much shorter expresso ;)

[HarrieDumenil-ws]

Hi, I've just replaced the pump with a new one and still have the same issue. When it turns on and rinses and turns off and rinses the water flow isn't flowing, it's dripping out very slowly and it makes a lot of noise before it starts flowing. Any ideas what this could be?