Mobile Workbench With Integrated Table Saw | DIY

In this video I showing how to build workbench for a table saw. I used Craftsman 113 table saw and also upgraded original fence with Delta 36-T30 fence.

Plans available here:

Materials used in this project:

2 in. x 4 in. x 96 in. Prime Whitewood Studs
3/4 x 4 x 8 UV Prefinished Plywood

00:00 Mobile workbench DIY
00:40 3D Modeling of workbench before build
01:03 Ripping plywood for the workbench tops
01:50 Ripping lumber for the workbench legs
02:09 All parts prepared time to assemble
02:17 Bottom frame assemble
03:27 Assembling top frame
03:38 Making lap joints
04:26 Attaching workbench legs
04:42 Attaching bottom frame
05:05 Mounting caster wheels
05:26 Attaching bottom shelves
06:20 Attaching workbench tops
06:45 Checking that surface of workbench is dead flat
06:53 Preparing place for the table top using router
07:51 First attempt to fit table saw :)
08:11 Final result

Craftsman 113 Table saw restore

I also filmed video about how to align table saw blade

Detailed step by step guide, how to remove rust from cast iron table saw top

#workbench #tablesaw #woodworking #diy #buildityoursellf #craftsman113

[jontaylor]

I have the exact same table saw! got it from Facebook marketplace for $40 and refurbished it. It came on a stand with an attached router table that I ended up trashing. Been looking for a set up like this! thanks for the inspiration.

[IronAngel]

Thanks so much for the free plans! I'm about to pull the trigger on the materials and I have decided to go with cedar for the 2x4x8 studs as it's supposed to help repel mosquitos as I get them a lot at night here in East Texas :)
I have a new Delta 36-725T2 that measures just 1/4" wider than the Craftsman 113 so It will work fine though I'm planning on a bolstered platform under the saw as I believe the Delta is heavier.
Again, many thanks and keep up the great work!

[valyastukova]

There is no limit to perfection. Well done.

[americanbuffalo]

Very nice. I have a small, 3 HP, 10" Craftsman Table Saw that really needs something like this.

[stephenwgreen]

Is there an advantage to hanging the saw from the table vs a platform for the saw to sit on?

Also, have you noticed any sag over the last couple of years?

Thanks, and thanks for the great video 👍

[Hottdoggs]

Wow...amazing, now I gives me some ideas

[garygreco]

Would like to see you incorporate both the miter saw and table saw in a single table. I would use a hard wood top for the table, like the Acacia butcher block at home depot. Gives you solid work area and will hold true angles when assembling. The issue we all have is space in our garages for tools not being used daily for work or fun projects. Both projects are great. I get the Cad work, but what did you use for table saw dimensions reference to build around? If I make this I want a 12 inch saw as well, allows for 4x4 cuting😉. This could be made out of 2 inch angle iron as well if you can weld, with the butcher block top. Sorry I have trouble with wood numbers, 2x4 are 1 1/2 x 3 1/2 mostly, but my brain goes to exact number in steel. Being a mechanic for 25 years burnt brain into that I guess. I even had all the shop classes again when I was 45.
Nice work thank you.... 👍🏻😁😉

[kondalord]

meraviglioso! è il bancone migliore che abbia visto fin ora! Complimenti!

[rubenpuentelopez]

Excelente.! Gracias hay que hacerla 👍🏻👍🏻

[leonardoalvarado]

Grate muy muy bien voy a intentar hacerlo muchas gracias

[andalo]

Hi, great job! Why did you chose to install table saw perpendicular to workbench and not parallel?

Nice work!!! You did it some months ago... How did this work in the long run? I ask you this because it is the very first video I see with the saw hanging and not based on the table....

[IronAngel]

What would be a great mod to this bench would be a sliding table on the left side. I'm going to put in a router on the right wide of the bench.

[jeffbassett]

HI, great bench. I am considering duplicating it. Your Craftsman 113 appears to be a but older than mine. Mine is a mid 1970's model. Can you tel me the dimension of the cast iron top. I want to confirm it is the same as mine hoping not to have to make any modifications from your plan. Thanks for posting and sharing your work.

[vashonscoot]

Well done! I am looking to build something just like this. Any chant you would share your drawings with me. Looks like a SketchUp drawing?

[mikemerc]

if i wanted to install this fence system onto my table saw, how long does my table saw have to be from front to back?

[MatthewKrieger]

Would you be able to provide dimensions of all cuts?

[Cwb_]

Did you mount the fence system to the saw or the bench? Will that fence system work with any table saw in this configuration as long as the 27” depth can be met?

[rjpoldfart]

Love the build. Great job. As for your next project, I would install some heat into the shop

[larry]

I give up, where are the free plans?
I have clicked on lots of links looking for the free plans to build the workbench with integrated table saw. I see messages saying they are not ready but that was several months ago. Has Anyone found the plans.
Thanks