DJI Mavic 2 - Refresh or Downgrade Firmware - RC1A & RC1B

How to refresh or revert Remote Control Firmware of Mavic 2 Pro or Mavic 2 Zoom remote control ( RC1A & RC1B) using DJI Assistance 2 for Mavic application.

RC1A and RC1B are essentially considered to be the same remote controller and both are compatible with DJI Mavic 2 Pro and DJI Mavic 2 Zoom.

Link to download Mavic Assistant 2 for Mavic:

Updating, downgrading, refreshing Mavic 2 Remote firmware Steps
1. Download & Install DJI Assistant 2 for Mavic
2. Open DJI Assistant 2 for Mavic
3. Connect USB cable from PC to side port or Mavic 2 Remote Control
4. Power on Mavic 2 Remote Control
5. Select Firmware in DJI Assistant 2 for Mavic Application
6. Select Update firmware
7. Wait for process to complete

Chapters
0:00 Intro
0:25 Download-Install Software
1:44 Installing Firmware
3:32 Outro

[RiBar]

Dji should be embarrassed, this comment section has more info than all the searching i have done to sort out my disconnection issues for years now. Never buying dji crap again.

[giorgosrousetis]

Hi. Where can I find an adapter? I don't have what it takes to make the connection. There is another way;

[bmw]

I have a Mavic 2 Pro and I'm getting the error message, Image transmission signal weak, adjust antennas on remote. I'm not positioning the antennas any different than I have been all along and I'm not flying any where I haven't flown before. I just finished refreshing the FW on the drone and the controller but now it's dark outside. As soon as I have time I'll do a test flight. If the problem persists I think I'll downgrade both the drone and the controller to the previous FW and test again. Thoughts.

Bob

[fadifidou]

Hello i connect mu RC on pc with micro USB to USB câble but the remot controller IS not detected

[bmw]

Update on the loss of image transmission signal.

I flew the drone after doing the refresh on the most current firmware, no change, get to an altitude of about 30 feet and my screen goes B&W and audio message that drone has disconnected from controller.

I can still control the drone with the remote and keeping a visual on the drone, brought it back down. Downgraded the FW to the previous version, launched from the same spot, climbed to 300 feet with no error messages. My conclusion, faulty FW. Would like to know if there are more Mavic 2 Pro's out there with the same issue. Makes me wonder why this FW has issues with my hardware!?

For the time being all is good.

Bob

[dadzkyl.]

Hi, I have my old reliable Mavic 2 Pro for 4 yers now. I just recently encountered an issue after installing the v01.00.0790 firmware. I have a total disconnect issue. Also I want to ask if you know any idea to get my RC1A detected in DJI Assistant 2 for Mavic?

[deepnspace]

followed the video, until the desktop app does not connect to controller, after powering on the remote! What now??

[christianrogari]

Hello, I have two identical controllers, model RC1B.
One is seen by DJI assistant as "mavic2 controller", the other is seen by DJI assistant as "mavic2 enterprise RC"
For each of the two, DJI assistant offers different firmwares and the one that is seen as "mavic2 enterprise RC" does not work correctly with my Mavic 2 Pro.
How can I reconvert the controller that is seen as "mavic 2 enterprise RC" so that it will be seen as "mavic 2 controller" and so that I can install the right firmware on it to get it working correctly with my Mavic 2 Pro ❓❓❓