Automate Analytical Models in Revit 2024 | Add Structural Loads and Boundary Conditions

Learn how to automate analytical models using the new automatic model tool in Revit 2024. From selecting elements to adding loads and defining boundary conditions.
Perfect for both beginners and experienced Revit users.

Timecodes:
0:00 - Introduction
0:34 - Automate Analytical model
2:40 - Set Boundary Conditions
4:17 - Add Loads to strcuture
7:00 - Outro

#AnalyticalModel #RobotStructuralAnalysis #BoundaryConditions #Loads #Rebar #Reinforcement #reinforcementlearning #reinforcementwork #Navisworks2024 #navisworksdownload #installnavisworks #educationalcommunity #educationallicence #Revit2024Tutorial #AutodeskRevit #BIM #DesignSoftware #ArchitecturalDesign #RevitInstallation #RevitActivation #EducationalLicense #DarkTheme #Toposolids #ProjectBrowser #RevitFeatures #VisualizeArchitecture #RevitTips #ArchitectureStudents #RevitLearning #LanguagePreferences #RevitCommunity #ArchitectureEducation #SnowdonPalace #RevitIntro #EducationalCommunity #DownloadRevit2024 #InstallRevit2024 #ActivateRevit2024 #DiscoverRevit2024 #ProjectBrowserSearch #ChangeDisplayLanguage #revittutorialforbeginner #DynamoScripting #revittutorialforbeginner
#automaterooms #roomsparameters #roomsinrevit #roomsdata
#excelroomdata #roomsarchitecture #modelingrevit #modelingDorms #modelingoffices #SelectElementsByCategory #DimensionsByElement #DocumentCurrent #DocumentActiveView #ElementGetLocation #CurvePointAtParameter #NumberSlider #LineBestFitThroughPoint #autodimensions #dimensions #measurement #walls #modellingwalls #2dto3d #dwg #autocadtorevit #autoacd #revitmodeling #DynamoForRevit #steel #steelbuildings #StructuralDesign #AutomationInDesign #ArchitecturalEngineering #BIM #EfficientWorkflow #RevitAutomation #3DModeling #ConstructionTech #ProductivityBoost #DigitalDesign #BIMProcess #BuildingInformationModeling #DesignAutomation #CADSoftware #BuildingDesign #ModelingEfficiency #BIMWorkflow #BIMIntegration #BIMTools #BIMCollaboration #BIMAdvancements #BIMInnovation #BIMCommunity #BIMExperts #Dynamo #DynamoStructure #RevitStructure #StructuralFraming #BeamDesign #BIMSoftware #BIMTechnology #BIMModeling #BIMImplementation #BIMCollaboration #BIMBenefits #BIMConstruction #Revit #RevitBIM #RevitModeling #RevitFamilies #RevitDesign #RevitArchitecture #RevitMEP #RevitStructure #RevitCollaboration #RevitWorkflows #RevitConstruction #RevitProjectManagement #RevitIntegration #RevitModelingTechniques #Revit2023 #Revit2024 #Revit2022 #DynamoTutorial #BIMTips #BIMTutorials #DynamoTutorials #StructuralDesignTutorial #AutomationTutorial #ModelingTutorial #ArchitectsToolbox #BuildingConstruction #MEPDesign #ArchitecturalDesign #EngineeringTutorial #ConstructionEngineering #BIMExperts #EfficiencyTutorial #ConstructionTips #BuildingDesignTips #RevitTips #DynamoTips

[tomshaji]

Expecting more about structural, subscribed ✌️

[sentumbwefarouk]

kindly help, when i do the automation, i find my analytical members especially beams below the nalytical floor panel, yet i see yours seem to align at the same elevation, how do you get to set that .? thank you

[sameerchavan]

Why I am not able to see an analytical model in the Revit structure 2023 version? That was visible in the 2022 version. Is the analytical model visible in the 2024 version?

[RasheedDalbah]

thank you for this video, i have a question please, how can i make sure the elements are connected at analytical model?

[FikreY-ogbj]

Thanks for the great video. However, I followed the exact same steps you did, but the different elements of the analytical model are not connected with each other as they are in yours, and that creat a problem when I try to send the model to Robot. Can you suggest what my problem might be? Thanks in advance.

[canli]

Thanks for the video. It is very helpful. Is your model a structural model or an architectural model? If I start with an architectural model, do I need to build the structural model first? In addition, could I do this with Dyanmo and control the boundary condition, floor/beam/column/foundation size, and load with Excel?

[Engrwaleed]

Can we automate floor items with dynamo? For example i have brick walls layout on first floor and the second floor is also having the same layout. When i do changes to layout of walls on first floor then the same changes replicate on the second floor as well.

[touilhamza-]

hi, can we can correct the analytical model with dynamo ?

[mamoonsakhawat]

can you PLEASE share The boundary conditions family?