stalled NACA 2412 DES openFOAM

preview_player
Показать описание
This simulation is done using openFOAM CFD software by utilizing Detached Eddy Simulation (DES) turbulence model to predict the stall behavior downstream while maintaining accuracy near the wall calculation.

  1. Caesar Wiratama
Рекомендации по теме
stalled NACA 2412 0:00:22

stalled NACA 2412 DES openFOAM

TOPT Airfoil NACA 0:00:37

TOPT Airfoil NACA 2412 Best Cl CFD Optimization | NACA 2412 DES openFOAM | CFD Support

Flow over NACA 0:00:21

Flow over NACA 2412 : Angle of attack from 0 to 15 degrees until stall

RANS, URANS, and 0:00:50

RANS, URANS, and DES turbulence Comparison modeling on NACA 0012 AOA25DEG Vorticity | CFD Support

Flow over a 0:00:18

Flow over a NACA 2412 AIRFOIL

Airfoil Stall 0:00:11

Airfoil Stall

NACA 2412 | 0:01:32

NACA 2412 | Different Angle of Attack

Airfoil NACA 2412 0:00:11

Airfoil NACA 2412 15 deg

Aeromodelo Free design 0:00:11

Aeromodelo Free design NACA 2412

Animation for Pressure 0:00:42

Animation for Pressure Gradient around a NACA 2412 Aerofoil at 1° AoA

NACA 2412 airfoil 0:00:25

NACA 2412 airfoil 10 degree AOA transient CFD

flying Iron man 0:00:27

flying Iron man flow simulation using CFD

Airfoil Optimization (Increase 0:00:11

Airfoil Optimization (Increase CL) using OpenFOAM and Reinforcement Learning

Sweep Angle Change 0:01:58

Sweep Angle Change | NACA 2412 Airfoil| #3d #airfoil |

Animation for Pressure 0:00:42

Animation for Pressure Gradient around a NACA 2412 Aerofoil at 15° AoA

HOW TO CREATE 0:10:02

HOW TO CREATE A BODY FITTING MESH FOR NACA 2412 AIRFOIL||MESHING TECHNIQUE CFD||AERO HUB

✅ #ANSYS #FLUENT 0:09:51

✅ #ANSYS #FLUENT - Tutorial de Perfil NACA 2412 con ángulo de ataque = °5 - Parte 1/3

NACA 2412 propellor 0:00:32

NACA 2412 propellor add by Sachintha And kanishka 2020

NACA 0012 Dynamic 0:00:10

NACA 0012 Dynamic Stall Vorticity Magnitude Contour

Airfoil E-387 in 0:00:20

Airfoil E-387 in OpenFOAM

MinhGFM - Airfoil 0:00:31

MinhGFM - Airfoil at High Angle of Attack (by OpenFOAM)

Stall of an 0:00:17

Stall of an SD7003 Airfoil

2D Laminar Flow 0:00:05

2D Laminar Flow Over a Prism (steady state)| OpenFOAM | ParaView #openfoam #paraview #cfd

NACA 2412 WIND 0:01:01

NACA 2412 WIND TUNNEL SMOKE TEST

Комментарии
Автор

I loved it when the wing said "It's winging time" and winged all over the place. Truly one of the moments of all time.

bitterlemonboy
Автор

It would also be interesting to see CL and CD values depending on the angle of attack in real time on the video. Just to understand, how these vortexes change them

rasgizatulllin
Автор

thanks for the tutorial on how to make hurricaines, this will be useful

lucio_evn
Автор

can we see the simulation with closedFOAM?

humbledbjesus
Автор

Cool. What was the Re ? K Omega or SA ?
Could you share the case files ? How did you mesh it ?
Do you think that the simulation could predict the effect of adding turbulators to the wing ? How fine would the mesh need to be ?
Thanks for sharing!

SomeTechGuy
Автор

Why am I getting airflow recommended on youtube

ocircles
Автор

This was truly one of the most stalled NACA 2412 DES openFOAM moments of all time.

CraftingTableMC