NEW RECORD!!

[thaaalegend]

If only you had a 3d printer that wasn’t shit :(

[hathn]

I feel like you don't need any infill for something like that and just increase wall thickness somewhere between 1.2-2mm. That's what I'd do anyways. I hardly even use infill for anything. It often 100%(usually just by increasing wall count) or 0% with the very rare occasion of 10% cubic or lines never anything in-between. Tho lightening could be the key if your insisting on infill for that model. Tho you'd be surprised how strong and fast a print can finish if you just eliminate infill and increase wall count.

[Bogm]

Not at my PC but doesn't adaptive cubic still scale with infill%? Been a while since I've used it

[demiundefited]

This printer is a gimmick anyway it would have been great if it actually prints consistantly but on many other reviews this printer just keeps breaking down.

[grantgaming]

you should 3d print a 3d printer printing a 3d printer

[ROCKETKNIGHT-phxp]

That defeats the purpose of making this printer. It can’t print hight 😅.

[TS_Mind_Swept]

I don't think that printer likes Shaq..6.6

[ofekpearl]

Me: Imma print it smaller to save material.
This guy:

[riba]

Do you know why it's failing? I might have an idea...

[pranavk]

Why does the printer keep failing? Have you found the root cause of the problem?

[BraveHornet]

What 3D printers would you recommend for beginners?

[lajoyalobos]

I wonder if you might need to shorten retractions or something like that. It's probably not so much height that's wrong, as it is amount of time spent extruding. Looks like the feet (which were taller) came out fine, so nothing to do with Z height along the model just a jam, clog or heat creep I suspect. I had a similar issue when my retrations were just a hair too high. My printer would print just fine until suddenly the extruder would start clicking and filament wouldn't come out of the nozzle anymore. The filament would get stuck in the heat break. Another thing is checking if the extruder is clean, there may be filament dust from the extruder working for a long period of time. I really hope to see the final result.

[Bnryzombie]

Battery backup and cool the electronics more. Motors can operate all the way up to 100c its bad but probably not the point of failure. Also on prints this large use a larger nozzle. This printer has long cables and might also have a short somewhere.

[vash]

so your having issuses getting it up? u know printing higher on the z 😂

[dkgoodrich]

Man I want this Giga to pan out, but I'm not so sure the issues are ironed out

[TDGroundHawg]

Use lighting infill, it will reduce print time and and filament.

[Bro-What...]

Yo i had the same first 3d printer, thats awesome

[IamMr.m]

Something that’s been happening with my printer as well is it’ll stop after a little bit. I have reformed the SD card and that seems to solve the problem for about a month. Granted, I’m still using the stock card and I should probably upgrade to something not as cheap.

[rollotomasi]

What is the purpose behind this print? Seems like a frivolous print...

[jakev]

What's stopping someone from just taking an ender hotend kit and editing the GCode for a larger size bed?