Bumping Gun Vs Mul-T-Lock Interactive High Security

So we take a bump pick gun that work on many locks and load it up with the Mul-T-Lock interactive key Custom made a bump key to fit and give it a go. This is the first time I have done this and the results speak for them self's. The point of this video is to show that the bump pick on this lock and if it will work, and that the cylinder has been used badly in this test, and see what's left after such treatment.

[mindgames]

I dont know jack about this but I feel like having an adjustment for the frequency of the gun to sweep the device through a range of vibration might be good.

[nelsonechevarria]

The reason why you failed to bump that lock cylinder open is because you are supposed to file down the tip of the bump key somewhat to where you can push the bump key a bit past the key pins.You must also maintain the key tip's profile when you file the bump key tip down otherwise the key will not insert into the lock cylinder.The bump key is supposed to be able to be pushed into the cylinder a bit past the key pins which does not seem to be the case in your video.I know what I am talking about and I have successfully bumped open Mul-T-Lock cylinders by getting Mul-T-Lock bump keys and modifying the tip of the key as I have explained above.You cannot apply too much tension when turning the bump key because Mul-T-Lock uses security pins that will catch if too much tension is applied when attempting to bump/pick open Mul-T-lock and Mul-T-Lock style lock cylinders and it's always good practice to use a lubricant when bumping/picking locks.P.S., I happen to be a licensed locksmith here in the U.S. and I know what I am talking about.

[ratatosk]

Cool to see all the different versions of el-picks, snap-guns, bump-guns You use

[jessejames]

All the metal shavings flying around LMAO

[Steel-Pinnings]

Great video,
I have used a similar device and method of picking on the classic MTL and had a bit of luck but nothing consistent. Let's me know not to bother with the interactive. Lol
Thanks for sharing.
~S🀄P~

[insanoinsano]

Explain 2 me why u fidnt put the lock in real mode, why up the lock ? Like that u destroy the pins with the metal going down..