How to buy the correct BM-800 condenser microphone?

Here is the one that is a much better BM800 mic -

[loplop]

safe to assume that all of the versions of this mic that are currently available are all inferior versions, its a common practice that they will release a relatively cheap product thats actually a good deal for the first few months and after the demand is high they jack up the prices while lowering the quality, usually this happens with unknown brands,

[limonahmed]

Thanks Dear .I also faced the same issue with Small circuit one and Seller adviced me to buy sound card instead of phantom power .

[MrJGM]

Got a bm-800 yesterday and the circuit board in it, is twice the size of your large one 🙃
So much variety.

[guntergiersch]

Hi, i have three BM-800-Microphones.
Two of them have a different, 3 Times larger circuit board (shown at 5:36), than your first and your second Microphone.
One of my BM-800 Microphones has the same small Circuit Board as your first BM-800-Microphone.
All three Microphones need 48V Phantom Power to work properly and all three microphones work together with a Behringer UMC22.
So i think your Problem with your first microphone must have some other Reason.
None of the Microphones is loud enough with the supplied external USB-Sound-Card!
By the Way - Zingyou is the original Manufacturer of the BM-800.

[badoodles]

Thank you for the tip... I just opened my newly bought condenser mic it was cheap...it doesnt say BM800 but has brand called GUARDA and the circuit board is actually huge! thank God.!

[TheRealMikePlayz]

Here is a tip just buy the Neewer NW-800 the original microphone those china made microphones are sometimes can be very sketchy so i recommend to buy the trusted one like the Neewer NW-800.

[bloxindoez]

Alright, good, i have one with a board about 3x bigger than the one u have

[rickmckee]

The BM-800 will run fine on 5 volts ! If you use the 48 volt supply, the circuit in the original BM-800 detects that 48 volts and puts it through a zener diode regulator that drops it to 5 volts anyway, so it is not actually operating on 48 volts - that gets regulated down to 5 volts !

[barteknowakowski]

With my BM-800 and proper mixer with phantom power I can easily and cleanly speak from other side of the room, which is around 5 meters. The PCB in mic is 'big' - much bigger than you your both microphones.

[iynch]

If want better sound just change the capsule into 25mm or 34mm

[liberty]

Thanks for the useful information on this.

[aiwinnilomosheikh]

I want you to know this video really helps a lot and someone out there really appreciates it

[limo]

Mine is larger than both combined but it only uses 1.5volts Which I can use on my phone

[naoton]

Feeling bless my bm 800 mic's circuit size is bigger than these 2 mic

[stephen.cabreros]

I have two of them and they have the same circuit board like yours but the other one is working fine because it has capacitor and the other doesnt have like yours it dont have a capacitor thats why it wont hear any sound or doesnt really have a sound input at all

[OBIFLY]

Nice information. I had similar problem.

[NovaAliMusic]

Both are fake 😂
real bm 800 have 3x times bigger circuit compared to these.

[Dave-Rough-Diamond-Dunn]

After seeing this video, I opened up the two BM 800s I have. They have slightly different circuit boards to one another, but they are far bigger than any in the video, in fact, I doubt that a larger circuit board could be fitted inside of them.
So this video is not the whole story, there are BM 800s with full sized circuit boards too.

[barteknowakowski]

Both BM-800 should work with phantom power. You've just received faulty mic, that you probably still can fix if you know how.

[DheerajS-konx]

I bought one bm 800 condenser mic and also a power supply ..but while recording songs, mic is producing hiss sound...how to remove this sound...Should I need to use a v8 interface or I can just record with mic and power supply ?!