Lipat kwarto Part 1 | Paglalagay ng Insulation foam sa kisame

Sa video na ito ay ipinakita ko paano namin ginawa ang pagdidikit ng insulation foam sa kinsame namin. Wala kasing insulation foam ang aming bubong at hindi ko narin mabuksan ang kisame dahil naipit na sa mga division na dinawa kaya idinikit nalng namin. Enjoy watching:)

==============================================
Song: Altero - Crazy
Music provided by Vlog No Copyright Music.
==============================================

#HindiKarpintero
#InsulationFoamSaKisame
#HardieflexCeiling
#BawasInitSaKwarto

[dominickguevarra]

para atang baligtad kasi sa mga subdivision nakikita ko pag naglalagay nyan yung aluminum face ang nakaharap sa bubong sa colored roof tapos yung puti or foam sya yung naka harap sa sahig, saka dami mo maglagay adhesive may iba pang pandikit jan na mas mura bostik din pero di silicone. tinitimpla lang sya ng tubig tapos dalawang mixture lang yun na powder pag natimpla mo na roler lang gamit mapagkit din yun

[ericdavid]

As i’ve seen sa citihardware yung foil is yung dinidikit tpos yung white ang nakikita.

[rhoszforevermore]

baligtad kuys..ung my foil dapat ang nkharap s ceiling/roof pra mgrelect ang heat..suggest qlng n dpt inuna mo ung corners pra pantay..then add nlng ng wallpaper kng gsto n my design 😄

[leobelvargas]

Tama ka idol mas ok Yung una po na no more nail Kasi gamit ko Rin Yan ok din Yan sa concrete madikit talaga Yan. Nice video .

[lionheart]

Pinapanood ko turo mo boss, e parehas pala tayong walang alam. 😂

[nyctophilia]

You’re right to think about the heat source being from the roof. However, the radiant barrier works by reflecting radiant heat, and its placement is a bit counterintuitive.

Here’s how it works:

• If the heat source is the roof, the radiant barrier should actually face downwards (towards the attic space) because radiant barriers are designed to reflect heat that is radiating downward from the roof. Heat from the sun heats up the roof, and that heat radiates into the attic. The barrier reflects that radiant heat back up towards the roof, reducing the amount of heat entering your living space.

If you place the radiant barrier facing up toward the roof, it won’t be as effective at reflecting the radiant heat back. Radiant barriers need an air space on the reflective side to work effectively, which is why they face down into the attic where there is airspace.

So, to keep your house cooler, place the radiant barrier with the reflective side down (towards the attic or interior space) to reflect the heat coming from the roof.

[nyctophilia]

You’re right to think about the heat source being from the roof. However, the radiant barrier works by reflecting radiant heat, and its placement is a bit counterintuitive.

Here’s how it works:

• If the heat source is the roof, the radiant barrier should actually face downwards (towards the attic space) because radiant barriers are designed to reflect heat that is radiating downward from the roof. Heat from the sun heats up the roof, and that heat radiates into the attic. The barrier reflects that radiant heat back up towards the roof, reducing the amount of heat entering your living space.

If you place the radiant barrier facing up toward the roof, it won’t be as effective at reflecting the radiant heat back. Radiant barriers need an air space on the reflective side to work effectively, which is why they face down into the attic where there is airspace.

So, to keep your house cooler, place the radiant barrier with the reflective side down (towards the attic or interior space) to reflect the heat coming from the roof.

[UrbanFarming-piwh]

1: Foil Facing Up: Kung ang iyong bubong ay mayroong radiant barrier sa ilalim ng mga bubong, maaaring mas epektibo na ilagay ang insulation foam na may foil facing up. Ito ay dahil ang foil ay maaaring magreflect ng heat mula sa araw pabalik sa labas, na nakakatulong sa pagpapanatili ng malamig na temperatura sa loob ng iyong tahanan.

2: Foil Facing Down: Kung walang radiant barrier sa ilalim ng iyong bubong, maaaring mas epektibo na ilagay ang insulation foam na may foil facing down. Sa paraang ito, ang foil ay magbibigay ng barrier laban sa pagkakalat ng heat mula sa loob ng tahanan patungo sa bubong, na nakakatulong sa pagpapanatili ng malamig na temperatura sa loob ng tahanan.

[solhoffmann]

Sir, ano kaya at lagyan ninyo ng canopy ang bintana ninyo para magkaroon kau ng shadow at mabawasan ang sikat ng araw sa tapat ng bintana.Magtanim din kayo ng punongkahoy sa paligid ninyo.
Kung possible Sir, much more Windows sa Nothside ng bahay ninyo. Indirect sunlight po doon.

[lakbaypalaboy]

hello, how are you my dear friend, this is great upload, I'm always watching your videos, just keep uploading more vides, keep safe and stay connected..,

[makeyourealise]

Wall cladding yata gamit nyu master kaya kahit may hardiflex ang wall nyu mainit parin. Kahit pa naglagay kayu ng insulation sa kisame

[maritesfontanosa]

ganda nitong vlog mo sir joe may natutunan ako, ang cute ng baby nyo po.

[eirazil]

Sir Joe, Dpat po double sided ung Foil ng insulation foam nyo para sure. Baligtad po kasi ata pagkakakabit nyo. Dpat po ung foil e naka dikit sa part na nainit which is ung wall. Para po di makapasok init na galing sa labas.

[genrevcalunge]

Yes balikdtad. Yung silver part yun yung nagrereflect ng init. Effective yan kapag naka aircon. Mamemaintain ang lamig sa loob.

[benenesanchez]

marami kz magagaling magcomment ai nayku

[troycasinillo]

Baliktad pagkakabit mo boss, gagawin mong microwave yung kwarto. Silver part should face outside, NOT inside. The silver material is the one that makes the heat bounce or repels it and the foam side absorbs the remaining heat.

[alvaroitliong]

baligtad ang insulator mo po Boss. Yong makintab dapat nasa taas, kc para e reflect nya ang init.

[jplmixvlogs]

Boss salamat sa pag share mas ok pla pag didikit nlng yan kita pako

[johncarlom.mangonon]

Nc sir ganda na yan iwas init na sir 🙂😊

[ViVo-nddr]

Naguguluhan talaga ako, ano ba ang dapat nakaharap sa yero, ung may foil or ung foam??