The WEIRD resin printing trick that PERFECTLY tensions my resin vat FEP Sheets

So I cannot tell you how many FEP sheets I wasted because I could never get the tension right or had uneven tension, Then I figured out this simple hack that changed how I change my FEP vats on all my non Mars and Photon printers.

[dynath]

Mounting the FEP is like stretching a canvas. Its best to start your mounting screws in the center of the armature not the corners otherwise the center will loosen as you poke holes. This allows you to tug the corner to maintain tension if needed and makes sure that the tightest point of the stretched material is the center where printing most often occurs.

[alexmachado]

I have failed twice at replacing my FEP and was getting frustrated. Watched this video and 20min later success, this worked like a charm, very easy to do and turned out better than the original. Much appreciated Hiro!!

[UncleJessy]

Okay this is a wild and awesome tip! I’m 100% going to try this

[gregself]

Thanks. This isn't weird, it's a practical solution to a complicated problem and it is really appreciated. Your thinking is in order :)

[ThatBartsim]

As a new person to resin printing, I am glad I ran across this video early. I think you saved me some headaches in the future! Thx subbed

[griflet]

Video starts at 2:16
Shorten the intro, it will increase viewer retention. Good tip though!

[victorbonetgallardo]

I've just changed my Sonic Mini 4k's nfep film with this trick and it's awesome!! I got successful tensioning before without this with a lot of effort but still was not perfect. With this I got perfect tensioning, first try, effortlessly. You rock!!

[Machinationstudio]

Just wanted to say thanks. Saw this video posted on an FB group. First time changing an FEP, followed your technique, and it turned out great. Onward with printing!

[fcsbob]

I just did this, first time replacing the FEP and it worked perfectly, Went in nice and tight. Thank you.

[The_Adm_Jachov]

I can confirm that this hack does indeed work, and not just work... It works 1000%. I've been 3D printing for a little over a year and have been using this tip on all of my resin printers and the results are flawless. Getting the perfect amount of tension is vital for a successful print and although I have suffered some print failures this was never down to the FEP. So, Thank you SO SO much for sharing this tip it has saved me a fortune on buying replacement FEP as I have been able to use a single FEP sheet continuously for up to a month if not a little longer before needing to replace. :D

[Rob-Heaston]

Nice idea. Also your explanation of how the different vats are assembled answered the question I was looking for. Thanks!

[sergiosalazar]

DUDE: this hack is SIMPLY AWESOME AND THANKS IN ADVANCE!!!

[TurboKillerB]

About to change my first FEP, this looks to be an awesome way to ensure I don't have a bad time! Thanks!

[shockdude]

Finally a proper tip for installing the FEP, thank you!

[aberodriguez]

Impressive ! Gave you a thumbs up and you got another Sub. I don't own a 3d resin printer maybe next year, but I need to learn as much as possible before pulling the trigger. This video was very educational and provided a necessary process that one should learn. Thanks for sharing.

[VicSicily]

this is actually pretty sick. Thanks man.

[takoza]

guess i got lucky replacing ma first FEP
but I also understand the logic in what you are doing here.
nice idea!
got a feeling it's time to change ma current FEP.
will try this out

[georgealexandris]

It’s brilliant, let them hate you, we love these hints ! Keep at it .

[NGinuity]

As a drummer, this is exactly the same as tensioning a tom. I even tap on the sheet with my finger at each screw location to listen for identical tone!

[charlesballard]

Don't have a printer yet, but I watch all the vids I can. This is a GREAT video!!!! I'm now subscribed. THANKS!!!!