Replacement DJI Mini 2 Middle Body Shell | Teardown into Pieces

Replace DJI Mini 2 Middle Body Shell is not Easy, It likes you have to Teardown your Drone into small Pieces . Everything in the drone have you tear apart. but if you want to learn how to change your Drone body Shell. You can do it. DJI Mini 2 Replacement body shell is where all the parts is keeping so you also have to be careful.

Whatsapp : [phone]

[MrByrnevids]

Tip when trying to get the rubber bits through the little holes loop a piece of sewing tread round the rubber tip and pull though the hole so easy to do. 2:21 2:24

[slickstretch]

Hmm... more work than I was expecting, but it doesn't look like anything that will give me trouble. Thanks for the video!

[roystaab]

hit the tree last night. so an arm came off the middle body. wow a real breakdown I have to do and follow you. the foddering...ugh. big job. you did it

[FUMACADRONES]

Goodnight excellent video, because it is shown with the camera on top of the drone, I've seen several videos, and only you and one other person stands out for their production, the eight video I saw, the guy marks the parts that will be removed, very cool. and just like yours, you can see it perfectly. Congratulations I'm from Brazil sao paulo

[stevecutts]

Great video, I followed step by step and it was very helpful, especially unclipping the delicate covers. Unfortunately something is wrong after the rebuild, the drone will not launch, and scrapes around in a half circle when the launch mode is activated. I have attempted to recalibrate everything but its still not working. Any idea what fault would cause this? Drone was flying fine before the rebuild, frame was replaced due to a break where one of the spring loaded arm pivots mount.

[richardreimer]

A TAD bit fast but informative. Thank You.👍

[YieSing]

Great video! subbed! may i know if the middle frame the same for dji Mini 2 and Dji mini 2 SE?

[sailingowlable]

Hi DJI Solutions, how many different types of screws are there? How do you know which screws go where when putting the drone back together?

[TanQNgo]

Is there a way to test the board? I dropped mine in water and it doesn’t power on.

[Nico-xx]

Thanks a lot. I did struggle a LOT to remove the glue on the front led cables! I actually cut the grey one when removing this f... glue. All the rest was super easy with patience.

[erikire]

NICE VIDEO!! where did you buy the new middle frame? ;P

[tobiaswaldner]

Thank you!
Great video for my mini 2 main frame replacement.

[sailingowlable]

And when soldering, how do you know which color of wire goes to which terminal on the PCB? Thanks in advance for the answer!

[djm]

What is the best place to purchase the replacement body? Amazon or aliexpress or can I buy it directly from DJI?

[philldownes]

I think i might have to get a middle frame. i have a crack and it dont seem to hold up with are these bodys made of abs or plastic ? what the best glue. i am a bit worried about having to do this strip down job.. i have had the top and the bottom off and replaced a broken arm.. but that been my limit so

[Avdarmaly]

Is there any calibration or something required after chassis replacement? Or it will fly straight away?

[stephenlangjahr]

hank You. I' like to remove the arms and motors off my Dji mini se and send the rest up to 100K feet aboard a high altitude balloon. Will this disable control functions and recording to the sd card?

[Coppersulfate]

anyone know where to get a middle shell for a mini 2 se?

[Paul-hgzs]

Does anyone know if a mini2 body replacement middle and top is compatible with mini SE

[gajendrasinghchouhan]

Sir bodi कितना में मिलेगा मुजे bdalna हैं