TS-FT002 Wireless Water Tank Meter

This is a wireless Water Tank gauge that has a range up to 100 meters.
water tank level indicator Keep an eye on your outdoor water tank from the comfort of your own living room, up to 100m away.
You can hang the receiver of the liquid depth level meter on the wall or pull out the stand, and place it on the kitchen workbench, table or desk.
View your room's temperature, tank temperature and water level (represented by a 10 element bar graph). You can store min/max records and set alarms for specific water levels (high/low) or when empty.
Specifications:
Material: plastic.
Indoor Temperature Range: 0~60℃.
Outdoor Temperature Range: -40~60℃.
Temperature Accuracy: ±1℃
Water Level Measure Rang: 0~15m.
Resolution: 0.01m.
Accurate: +/-0.03M.
Transmission Frequency: 433MHZ.
Transmission Range: 100 meters(300 feet)in open area.
Transmission Interval: 30s when level changes or 3 minutes when level does not change.
Receiver Battery: 2X AA 1.5V LR3 Alkaline batteries (Not included).
Transmitter Battery: 6X AAA 1.5V LR6 Alkaline or lithium batteries (Not included).

Package include:
1 * Indoor Receiver.
1 * Water Level Sensor Transmitter.
1 * User Manual.

This channel is all about this families different Recreation vehicles, trips we have taking to out favorite destinations and the problems we have experienced along the way. I will present to you fixes I have performed on our RVs over time . We have camped in tents, small trailers, fifth wheels and motorhomes since we were kids'

[shirleyannvarney]

So helpful - would never had manage to set my meter up with out this - Thank you

[theclouds]

Did you try using more then one device at once to tell if it will have signal conflict for the receivers ?

[MrBisherd]

Hi Jerry
I have been using mine for a month and suddenly the level stuck on full I reconfigure it but didn't help, any tips?

[PointlessExistence]

How often you need to change the batteries? Its bummer it resets the setting every time you do that.

[NoRegrets]

I installed it but it doenst seem to recieve anny signal? I even placed the reciever and sender next to eachother. How did you 'connect' them?

[collectorsinfo]

Hi, thanks for the Video. Got my one set up & all seems to work well. But one small problem is i keep loosing the signal. Everything is still showing ok except the signal icon. Now, if i press the tank button for 5-6 seconds it ill comes back. Then after a few minuets it disappears. Do you have this with yours ??.I am thinking its a battery saving part of the unit.

[fernandogracian]

me marca que esta vacia me puden ayudar?? hay problema si tengo 2 equipos juntos?

[fernandogracian]

It shows me that it is empty, can you help me? Is there a problem if I have 2 teams together?

[daciimini]

How accurate is it sir?is still working today? And last question, …does it consume Lot battery?

[lplp]

even after drying, it does not read anymore, lasted less than a year

[mbahrani]

how did you make it work ? mine still says empty.

[Ibanezyt]

Avoid. Humidity in tank kills the ultra sensor.

[skysurferuk]

Bit of a useless review if you don't show the mounting of the transducer... is it necessary to cut a hole in the tank?