Volkswagen ALH standalone wiring harness detail for engine swap

Показать описание

This video is just meant to serve as a guide, your harness may vary depending on what you want to keep or delete. I hope it helps figuring out what some of the stuff is though and makes your engine conversion a little bit simpler. The fastest way to make this harness is to start de-looming it and just start cutting out the stuff that you don't need and isn't shown in the video.

Resources that are very helpful:

ALH Pinout:

Another Wiring harness video:

Black Connector 01:28
Orange 02:10
Blue 02:20
White 02:43
Manifold Absolute Pressure 03:04
Mass Air Flow sensor 04:00
Extra deletions 04:38
N75 actuator 05:28
Glow Plug relay 06:08

Brown Power Connector 08:00 and 10:30
T14 Power connector 11:20
Fuel Pedal/Blue connector 14:05
OBD port/white/orange 15:28`

Brett313

Рекомендации по теме

Комментарии

Thanks a lot for the whole series. It will help me a lot during my swap!

Mles

Hi there! Great video, wondering about a few things. When you say something needs 12v power does that mean ignition power or constant 12 v power? Also the lilac yellow wire on the blue connector, do you connect that to ignition power to wake up the ecu if you’re not running the 109 relay? Thanks!

adamsytsma

hi, i have a 1.9 tdi alh engine on my vw bora now, but im thinking to do a swap to 1.9 arl, i suppose that i need to change all the harness right?

mariusstoiu

On the T14 connection will you give the numbers for the power and grounds. I don’t have that plug so I will have to splice into the engine harness.

bradbarnes