lightburn activated enclosure fan and light?

preview_player
Показать описание
Doing a quick test and review of the Ortur enclosure for the LM3 that I was sent. The enclosure is 700x720x370mm and has some pretty cool technical features. These features integrate with the LM3 to allow activation of the light and fan with lightburn.

MACRO COMMANDS
Light on- m12
Light off- m13
Fan on- m14
Fan off- m15

For templates that I have made, check out my Etsy shop. I build files for projects and tools for laser engravers.
For Clack Shack shirts, check out my store:
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.

  1. The Clack Shack
  2. diy
  3. xtool d1 10 watt
  4. xtool laser engraver
  5. woodmizer lx25
  6. woodmizer
Рекомендации по теме
lightburn activated enclosure 0:18:09

lightburn activated enclosure fan and light?

Ortur Laser Enclosure 0:12:24

Ortur Laser Enclosure 2.0 with Lightburn controlled Light and Fan!

Ventilated laser engraver 0:13:06

Ventilated laser engraver enclosure for Genmitus LC-50 Plus (no narration)

Laser Exhaust Fan 0:12:20

Laser Exhaust Fan / Can I make it Auto On?

ORTUR Laser Engraver 0:13:25

ORTUR Laser Engraver Enclosure Fireproof and Dust proof

MrTass QuickTip - 0:01:46

MrTass QuickTip - How to Turn the Laser On When Framing in LightBurn - Creality 10w Laser Module Kit

Set up the 0:08:41

Set up the Comgrow Camera Module with Lightburn in Minutes

💡 Lightburn 401 0:21:39

💡 Lightburn 401 - Windows and Tabs, Understanding Functions

Adding Lights to 0:16:55

Adding Lights to the xTool Portable Enclosure

FACCIAMO CHIAREZZA! Quale 0:11:37

FACCIAMO CHIAREZZA! Quale licenza di Lightburn acquistare? Gestione delle licenze.

How to Control 0:08:54

How to Control the Z axis in Lightburn on a Atezr L2 36 Watt Laser Engraver Cutter.

Sculpfun S9 Kamera 0:15:18

Sculpfun S9 Kamera einrichten in Lightburn Gravieren mit Senf

Enclosure for the 0:18:45

Enclosure for the Xtool D1 extension kit by Clearview Plastics.

Would You Sleep 0:00:08

Would You Sleep Here? LED Lights

Controlling an enclosure 0:15:24

Controlling an enclosure heater and silicon bed heater with a Duet board.

WECREAT VISION 20W 0:21:30

WECREAT VISION 20W Laser - Fully Enclosed

finger laser engraving 0:00:12

finger laser engraving FAST#laserengraving #fiberlaser #lasermarkingmachine

Comgrow Lightburn Camera 0:22:30

Comgrow Lightburn Camera Module - Setting it up and calibration!

Sculpfun S10 and 0:20:27

Sculpfun S10 and Lightburn: Setup and simple laser engraving demo for beginners

(DON’T DO THIS) 0:11:43

(DON’T DO THIS) to Your Laser The XTool D1 Pro 20w

Flickering LED lighting? 0:01:10

Flickering LED lighting? Here's what's really happening

Creality Laser Enclosure 0:20:07

Creality Laser Enclosure Tent Fume Extraction and LED Lighting Upgrade

Laser Engraving Fumes 0:40:36

Laser Engraving Fumes and How You Can Deal With Them - Fume Extraction Basics

Get Ready For 0:22:35

Get Ready For Halloween with the Xtool D1 20 Pro, Air Assit & Enclosure 10% off

Комментарии
Автор

Excellent tip as usual :) You can however improve on it by adding your commands/macros to the "Device Settings" - "Gcode" and the Start and End Gcode" which is called on job-start and end. That way you can automagically turn on or off the light and fan when each job starts 😀

pelleparrafin
Автор

Just curious, I hear you mention light escaping from around various enclosures. Is that escaping light actually harmful to your eyes? I would not think the light itself would be harmful unless you are looking into the light beam itself.

camarogs
Автор

it is actually using (sending) gcode to the controller unit. with Lightburn you can edit gcode startup to include the gcode to turn on the fan and turn off/on the light at the start of all gcode processing. I would imagine you cold add a post code to turn off the fan at the end of your operation - but I would advise against that because the fan is continuing to cool down the laser module after completing the project.

TravisTycMe
Автор

Wow, this could be great to drive air assist and a larger exhaust fan. Where are the connection points on the LM 3 harness? Contacts or voltage outputs?...lots of questions. Will you be following up with an air assist modification? Thanks for the video!

vikingwind
Автор

can we use light and fan on-off with athore laser printers? i have creality and i use lightburn with raspberry pi at the printer.

Sodwmistis
Автор

What if I don't have a Ortur laser and want to use the fan and light. How much voltage do they use?

franknicholsr
Автор

what is the code for fan on and fan off?

SkyfarmPoD
Автор

This help alot but you never say what command is for the fan

danielmaldonado