GLCD interface with stm32 | KS0108 Graphic LCD interface | STM32 programming | Simulation | Project

Hi,
In this video we talk how to interface graphical LCD with stm controller. This is part 1 of the interface video. In next video we will see how to create fonts and in the next part we will see how to continuously write without disrupting the flow. The GLCD is used to display images in binary format and is used in many projects. You can use it to display simple animations and make the projects more interesting.
Hope you enjoy the video.
or whatsapp us on [phone]

Join our telegram channel: stmetatronics

[stmetatronics]

This is part 1 of the GLCD interface videos. We have shown the basic configurations and connections needed to start working on GLCD. We will go in advance in later parts, how to create fonts, images and how to write data in continuous manner.

[felixcenteno]

from the lcd manual (YM12864J): " The data from MPU is written into input register, then into display data RAM automatically by internal operation.
When CS1 to CS2 are in the active mode and D/I and R/W select
the input register as shown in Table 1, data is latched at the fall of E signal. " so Enable pin is active in the falling edge or when it is 0, my LCD has exactly the same commands to unitialize than yours but the enable pulse is reverse. I am confuse...

[eduardodelarosaferrer]

Hi sir, could you share the code, please?