Slash 4x4 build vid pt11 mip 17mm hex adaptors

This is my slash 4x4 street build I'm hoping for this to be crazy fast this isn't my first speed build so it should be good thanks for watching the link to the playlist is below

[terminalpsychosis]

The spacers go between the bearings in back. Keeps them from getting smushed if over-tightened.
If you have MIP drive shafts they probably came with the same type of spacer for the same reason.

[RayRiv]

2 questions...do you have to locktie the wheel nut? And do you experience any wheel slop?

[ErJr-ywvo]

I run the d8's on my lcg and they are awesome compared to the gtrs. Also those little washers goes in between the bearings inside the rear carrier. In case you haven't found that out yet. Nice rig btw

[tomparry]

Don't change socks! Put the variable damping shock pistons for the revo GTRs. If your using them for street driving then the plates go on the bottom of the piston. And drill the pistons out to 1.2mm all 4 holes. You will also need between 30-50 shock oil.

[sbckev]

I would love to see a vid about how to put E Maxx wheels on a Slash 4x4! I may be the first to do since I'm getting adapters/extensions for mine today, hope it works out ok🤞

[trxxslash]

metal brushing go on inside front bearing on each side

[chrisseal]

Thanks a ton I actually did figure that out thanks for the info.

[joeh]

Hey, just wanted to let you k now that those little rings that you left out after being unsure what they were for are actually "Rear Bearing Crush Here's a link to instructions on how to install

[syren]

whats the name of those tires and wheels ?