Best Choice Products Power Wheel Jeep Upgraded 12v ESC Weelye RX30 24v kids Conversion P2 walk thru

preview_player
Показать описание
PLEASE HIT THE "SUBSCRIBE" above to support the Channel for more cool upgrades and tutorials. thx

NEW VIDEO !!!!!!
Full BCP/Weelye wiring layout
From 12v to 24v explained in detail.
__________________________________________

Best Choice wiring Walk Thru P2

Best Choice Products (BCP) Jeep 24v
Upgraded from Weelye stock 12v ESC to
Weelye RX30 24v ESC overview.

*7Pin Male Plug fits RX-30 but is made for 6S LiPo Battery lead Wire

Also Upgraded to 24v 550s 18000rpm with gearbox complete from amazon. Fits exactly no mods needed.

On 24v Weelye RX30 the stock 12v steering servo motor was reversed on mine so i flipped the wires to get it steering the right way. (Steering will be much more snappy with 24v just a heads up) Also when installing the motors, make sure the wheels spin in the same direction. I soldered the motors exactly as the stock gearboxs had them and one was reversed so plz check before you finish. You also need to get a 24v to 12v regulator on Amazon 6pack is $10. Any 12v electronics that come stock or that you add should run thru one. I forgot to test it and it burnout my custom rollbar lights. Also Weelye 24v Trucks come with a hi/low switch which can be had here

*Remember if your on 12v and upgrading to 24v you need to setup your battery voltage to output 24v with a 2nd 12v ran in series, other wise this ESC wont power on. You also need a 24v charger but one can be had here at amazon cheap.

I used 12v MightyMax as additional Battery to run 24v. 12v x 2 in Series;

Battery size slot 1 fits:12v 9ah (stock)
Battery size slot 2 fits:12v 10ah-12ah

Auto charge feature

My Car in action

Heres a folder of some wiring pics and Diagrams that may assist you if needed for my jeeps

Updated on 4/12/21:

Post pic of your Ride here for troubleshooting or just to share:

Some other 18v and 24v projects:

Рекомендации по теме
Комментарии
Автор

12-1-20
"NEW" BCP Weelye Wiring Video"

This will show you the Schematic live and layed out as we will do a 24v upgrade to the stock harness complete with parts. Enjoy

Neonjer
Автор

So far the best video out there, thanks for your info. I just bought a RX30 because i fried the one my son had, im thinking of running the 12v motor until they hit the ground then upgrade to the 24v motor and gear.

Dilati
Автор

Thank Perfect video. Had a blue wire pop out of something, I just started your vid but I'll find what it is now lol

pumpkin
Автор

Thanks bro. Not much info on this conversion but looking forward in doing it

jovanies
Автор

Can u tell me what the blue wire connect to?

stbaldawi
Автор

I just bought the weelye kit to convert my sons Best Choice Jeep from 12v to 24v and the steering wiring is different from the kit. Just making sure I'm doing the right thing bcoz there's still 2 wires and as long as I connect the ground with ground wire and power with power wire I shouldn't have any problem.

Also do you suggest to have a regulator for the steering so it is not receiving all 24 volt and possible frying the steering motor?

Thanks in advance and by far the most informative video, atleast for me.

richardebido
Автор

Hi and thank you I have done the 12v to 24v conversion with remote and all is great thanks to your video!! We have the same jeep and I wanted to ask where you got the led for the light bar? I would like to do this too!!

Thank you sir.

funkyphil
Автор

I hooked up 2 18V makita batteries the original set up had 2 12V batteries. I had fuses hooked up as well and as soon as I turned it on the board burned out. I’m thinking I wired something wrong. Should I be able to support those 2 18V batteries?

NusinkisTV
Автор

I tried a mod upgrade from the 12v to 18v drill batt just how other videos show, on this exact model best choice jeep.

Only, it did not work at all.
Did ever try that route?
Or do you have any tips on how i can successfully install that 18v batt mod?

solorio
Автор

Is the 18, 000rpm better than the 40, 000rpm? My daughter has a jeep like this that on the Milwaukee it takes off super slow then picks up after like 20ft

MrEazyS
Автор

Is there a video on how i can upgrade to a Hobby Grade Remote, ESC, etc

robinhoodloom
Автор

Is this Esc setup compatible with two 12v 12ah lipo batteries?

davidash
Автор

Dei ao meu filho um carro parecido com esse, mas só tem radio e luz dianteira.
Pretendo alterar para 24v. O que percebi é adquirir um rx30 e depois e ligar os cabos do rx23 para o rx30. Pelo que pesquisei só te ho que ter atenção à conversao de 24v para 12v a fiação que vai para o radio e volante e luzes certo? No rssto do carro pode ficar os 24v. O comando do rx23 é compatível com o rx30?

samsungxiaomi
Автор

By adding the extra battery did it make it faster?

oscardelaespriella
Автор

What led lights did you use for the roll bar and how did you install them?

apirk
Автор

Hey boss man, i have a similar Jeep Radio works lights work it kicks on and everything, but it only goes in reverse, not forward any idea what it could be?

antoniobelmontes
Автор

Does the radio control still work like this

jerrykibling
Автор

Hit the "SUBSCRIBE" button if these videos are helpful. Thx

Neonjer
Автор

Did do anything to have the slow stop or is it a feature on the 24v rx30?

cristiancastillo
Автор

My jeep start light turns on(red) but no noise or when hit the pedal it don’t work.. I don’t know what to do .. I change the control box and still the same result help please

shahzadasl