37. DHCP Server & Inter-VLAN Configuration in Hierarchical Model #3 | Advanced DHCP & Multiple VLANs

PLEASE SUBSCRIBE TO MY CHANNEL

Please subscribe to my channel, thanks for your support good people. LOL

[gurutechnetworks]

PLEASE SUBSCRIBE TO MY CHANNEL


Please subscribe to my channel, thanks for your support good people. LOL

[phananorn]

13:07 How do I display the port label for an extended period of time when the mouse is over it?

[sweetdukes]

You have a L3 switch in your network...but do not use it to route. So what is the point of having it there if you could have just used an ordinary switch?

[suman]

hi sir i am following your video very long time
my qustion is in this video my access layer switch is unmanaged how to create vlan and i have a one pc connected with d-switch different vlan now how can i manage d-switch and router by telnet or ssh also need to connection with different vlan devices like ap .

[nathanruben]

I do not understand, multilayer can route subnets, router is probably just to access outside or other far networks. Why do you route vlans in router instead of in multilayer (l3) switch

[ShaunDan]

Can you do a lab on

2 different ISPs for HA
1 HQ
3 Branches in
3 different locations are connected using VPN and HQ and all the branches should have an ASA firewall (ASA5506-X) .
the firewall should have 3 Zones Inside, Outside, DMZ  (ZBF)
Should be a DHCP server for IP release (HQ and Branches)
Subnetting should be there.
Minimum 5 Vlans

inter Vlan routeing between HQ and Branches

each branch should have at least 2 Servers (any WEB, EMail etc...)



Hq should have servers and branches should be able to communicate with the servers.

[nathanruben]

I am not professional but I am quite sure that you wasted multilayer switch. If you are not going to use routing capability of multilayer switch then why do you use one. Just connect edge switches directly to router. The same configuration etc. Why the hassle.