How to remove ash deposits in diesel-particle filter systems with MOTIP DPF Cleaner?

preview_player
Показать описание
Remove ash deposits in diesel-particle filter systems without disassembly with MOTIP DPF Cleaner. DPF Cleaner is fast-acting and is non-corrosive. MOTIP DPF Cleaner is free from solvents and non-flammable.

Product details:

Usage instructions:

BEFORE USE, CAREFULLY READ THE DIRECTIONS ON THE PACKAGING AND ACT ACCORDINGLY.

(For professional use only)

1. The aerosol should have room temperature

2. Best processing temperature 10 to 25°C.

3. Before use, shake the aerosol.

4. Before use, allow the engine to cool down (maximum 50°C). Observe the instructions of the car manufacturer.

5. Disassemble temperature or pressure sensor from the filter. Insert the special tube into the opening. Empty the can in the following intervals: spray 3 - 5 times; allow to soak for 5 seconds

6. Install temperature or pressure sensor. Start the engine and allow to run stationary for at least 15 minutes to evaporate most of the fluid. Make a test-drive of 30 minutes. This may cause the formation of steam.
Рекомендации по теме
Комментарии
Автор

Done this twice over 5 years on a Bmw 525D 3.0L. I can confirm that the dpf message dissapears.
I did the 5 seconds sprays inbetween from a hose directly down to the filter, idled at 15 minutes and drove a little harder than usual in both high and low gears for heavy pressure for about 30 minutes.
I always buy 2 bottles just in case.

kentnewfence
Автор

Excellent discovery this product is the cheapest solution available.Bought 2 motip spray and lambada key on ebay.Changed oik and oil filter.Sprayed motip dpf in oxygen sensor, left engine running idle for 15mins and went on motorway driving 70 miles an hour in 5th gear. On the way back my SUV on the hill was as powerful as F35.

Athlete-Athlete
Автор

How does this remove ash without an acid?

DPoner
Автор

Didnt do a thing to my dpf in fact it caused the ash level to rise a but more.

chriselwick
Автор

Thank you for the video it was simple, informative and very helpful.
I have been searching YouTube videos for almost 2 days on where to insert the tube or what the sensor looks like.
I really think this video will/can help alot of people if it was higher on the search, for example calling it how to use dpf cleaner etc then the brand name 👍 Thank you I now feel confident enough to use the product before having to pay hundreds of pounds to a mechanic.

staceyblackham
Автор

It really works...Škoda Octavia 2 RS - 75 DPF and now all lights gone and car normal drive 👍

rellikcz
Автор

Just applied it on a 9 year old Audi Q3 2.0TDI.
It regained a big amount of power. Very noticeable.
Have to see if it gets past emissions again

surreal
Автор

Can I spray directly to dpf? From opening on exhaust?

miljandobrijevic
Автор

For a 2011 Mercedes w204 220CDI where will I put the cleaning spray? On the probe or in the pressure sensor tubing (wide or thin tube). Thank you

MiguelRodrigues-mnkk
Автор

I have an VW Passat 2012 Diesel 1.6 variant, it have very poor engine power, and the DPF lamp is flashing. Ive tried to poor some DPF cleansing inn the tank, this didn't work, now im gonna try this method....i hope this will hjelp, if not it's gonna be very expensive to fix.

stalekristiansen
Автор

Hello motip, how many DPF cleaner is safe to use at cleaning time?

rajen
Автор

hello

do you have to ride in the pandent towers try on the road
or a simple 30-minute drive is enough
Thank you for your reply

laurentdebailleul
Автор

Can the DPF spray work also without forced regeneration and without changeing with Lexia3/diagbox any codes?

frv
Автор

hvad koster et rens af et partikelfilter som er stoppet?

swamp
Автор

Hi, thought to try this. I have pre-CAT, CAT and DPF. EGT sensor 1 between pre-CAT and CAT, EGT sensor 2 between CAT and DPF. where to spray ? thanks.

goodday
Автор

5. Disassemble temperature or pressure sensor from the filter. should say Before the dpf. as there is temp/pressure sensors each end

Scouterlad
Автор

I tried this stuff and it don’t work, my ash residue was 67.89 and now it’s 68 so it does not reduce or clean ash residue as advertised. I bought 2 cans still have 1 left might make a video showing it does nothing to remove or reduce ash residue and will wait to see what motip has to say

kharali
Автор

Can you leave engine on while exhast is off underneath for direct effect?

maxi
Автор

i usd this and has helped some cars but not all, mainly due to the percentage of blockage of the filter

kmyx
Автор

How I can know that product has decreased ash level and how much has it decreased? I used the product on 2.0tdi (CRBC) which had no warnning or error lights but it has 70% full dpf of ash. As far as I got ash level is just calculated by number of regenerations.

Bmt