filmov
tv
LumiLor Basic Training 2018 All Modules
Показать описание
Chapter point times, module numbers and names...
00:00 M001 Introduction and LumiLor Theory.
00:55 M002 LumiLor Stack Diagram.
02:32 M003 Unboxing the LumiLor Starter Kit.
03:05 M004 Preparing the plexiglass panel and speed tank.
04:16 M005 BACKPLANE masking.
06:11 M006 BACKPLANE explanation. spray gun overview.
07:08 M007 BACKPLANE shake, strain, loading spray gun.
07:39 M008 Proper spray gun mounting between coats.
07:51 M009 BACKPLANE application on panel.
08:44 M010 BACKPLANE application on speed tank.
09:13 M011 Resistance check with multimeter.
09:37 M012 BACKPLANE unmasking and sanding tape edges.
10:14 M013 DIELECTRIC explanation.
10:49 M014 BACKPLANE masking the connection site.
11:23 M015 DIELECTRIC shake, strain, loading the spray gun.
11:59 M016 DIELECTRIC application on panel.
13:20 M017 DIELECTRIC application on speed tank.
13:47 M018 LUMICOLOR explanation.
14:12 M019 LUMICOLOR shake, strain, loading spray gun.
14:48 M020 LUMICOLOR application on panel and speed tank.
15:57 M021 BUSBAR explanation.
16:32 M022 BUSBAR masking the panel.
17:49 M023 BUSBAR masking the speed tank.
18:13 M024 BUSBAR application on panel and speed tank.
18:48 M025 Resistance check with multimeter.
19:51 M026 BUSBAR unmasking and and wiring overview.
20:07 M027 BACKPLANE spade connectors preparation.
20:48 M028 Spade connectors and connection test.
22:00 M029 Spade connectors mounted with J-B KwikWeld.
22:40 M030 BACKPLANE application with panel connectors.
22:57 M031 Male connector application on speed tank.
23:32 M032 BACKPLANE application on speed tank connectors.
23:50 M033 Masking connection site and connect the inverter.
24:27 M034 CONDUCTIVE TOP COAT (CTC) explanation.
24:49 M035 CTC shake, strain, loading spray gun.
25:21 M036 CTC application to panel and speed tank.
26:18 M037 Encapsulating Clear Coat explanation.
26:43 M038 Encapsulating Clear Coat application.
27:23 M039 LumiLor encapsulation.
27:44 M040 Black out and Final Clear explanation.
27:57 M041 Black out preparation of panel and speed tank.
28:14 M042 J-B KwikWeld application.
28:56 M043 Masking of the illuminated area.
29:43 M044 BLACKOUT application and unmasking.
30:18 M045 Final Clear Coat application
00:00 M001 Introduction and LumiLor Theory.
00:55 M002 LumiLor Stack Diagram.
02:32 M003 Unboxing the LumiLor Starter Kit.
03:05 M004 Preparing the plexiglass panel and speed tank.
04:16 M005 BACKPLANE masking.
06:11 M006 BACKPLANE explanation. spray gun overview.
07:08 M007 BACKPLANE shake, strain, loading spray gun.
07:39 M008 Proper spray gun mounting between coats.
07:51 M009 BACKPLANE application on panel.
08:44 M010 BACKPLANE application on speed tank.
09:13 M011 Resistance check with multimeter.
09:37 M012 BACKPLANE unmasking and sanding tape edges.
10:14 M013 DIELECTRIC explanation.
10:49 M014 BACKPLANE masking the connection site.
11:23 M015 DIELECTRIC shake, strain, loading the spray gun.
11:59 M016 DIELECTRIC application on panel.
13:20 M017 DIELECTRIC application on speed tank.
13:47 M018 LUMICOLOR explanation.
14:12 M019 LUMICOLOR shake, strain, loading spray gun.
14:48 M020 LUMICOLOR application on panel and speed tank.
15:57 M021 BUSBAR explanation.
16:32 M022 BUSBAR masking the panel.
17:49 M023 BUSBAR masking the speed tank.
18:13 M024 BUSBAR application on panel and speed tank.
18:48 M025 Resistance check with multimeter.
19:51 M026 BUSBAR unmasking and and wiring overview.
20:07 M027 BACKPLANE spade connectors preparation.
20:48 M028 Spade connectors and connection test.
22:00 M029 Spade connectors mounted with J-B KwikWeld.
22:40 M030 BACKPLANE application with panel connectors.
22:57 M031 Male connector application on speed tank.
23:32 M032 BACKPLANE application on speed tank connectors.
23:50 M033 Masking connection site and connect the inverter.
24:27 M034 CONDUCTIVE TOP COAT (CTC) explanation.
24:49 M035 CTC shake, strain, loading spray gun.
25:21 M036 CTC application to panel and speed tank.
26:18 M037 Encapsulating Clear Coat explanation.
26:43 M038 Encapsulating Clear Coat application.
27:23 M039 LumiLor encapsulation.
27:44 M040 Black out and Final Clear explanation.
27:57 M041 Black out preparation of panel and speed tank.
28:14 M042 J-B KwikWeld application.
28:56 M043 Masking of the illuminated area.
29:43 M044 BLACKOUT application and unmasking.
30:18 M045 Final Clear Coat application
0:31:25
LumiLor Basic Training 2018 All Modules
0:00:57
M001 Introduction and Basic Theory of LumiLor
0:02:46
LumiLor Concept & Working
0:02:13
How To LumiLor: Adding Extra Tape Line at Busbar Step for a More Accurate Reading
0:01:37
M002 Basic Explanation of the LumiLor Stack Diagram
0:00:36
M019 Shaking, straining, and loading the spray gun with LUMICOLOR
0:00:58
M006 BACKPLANE layer explanation with spray gun overview
0:01:07
M045 Final Clear Coat application
0:00:35
M024 Application of the BUSBAR with dialed in spray gun on panel
0:00:13
M008 Proper spray gun mounting between coats
0:00:58
M036 Application of Conductive Top Coat to panel and speed tank
0:00:37
M015 Shaking, straining, and loading the spray gun with DIELECTRIC
0:00:25
M011 Resistance check with multi -meter in ohms setting on BACKPLANE
0:00:48
M044 Application of BLACKOUT and unmasking of panel
0:00:28
M017 Application of DIELECTRIC with spray gun on speed tank
0:00:43
M042 Application of J-B KwikWeld to connection site on panel
0:01:21
M016 Application of DIELECTRIC with spray gun on plexiglass panel
0:00:30
M010 Application of BACKPLANE with spray gun on speed tank
0:01:12
M004 Preparing the plexiglass panel and speed tank
0:01:00
LumiLor Training Program | Latest Offer | 33% Discount
0:01:17
M022 Masking the plexiglass panel for BUSBAR application
0:00:17
M041 Preparation of panel and speed tank for BLACKOUT
0:01:03
M025 Resistance check with multi -meter in ohms setting on BUSBAR
0:02:21
How To LumiLor: Busbars Part 1
Комментарии