DIY air conditioner/ Diy air cooler/IMPROVISED ELECTRIC FAN AIR COOLER / Mist makes /air conditioner

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

Too much trouble making a DIY cooler with plastic storage box. Use Styrofoam box instead. Make 2 holes, one for inlet air (mini fan) and one for outlet air (a 3 inch pvc elbow would do) on the cover of the box. Put ice blocks inside and its done.

harryng
Автор

У подобных самоделок есть один большой недостаток. Они повышают влажность в помещении. И вы получите росу на стенах и мебели. И плесень. Кондиционер не только охлаждает, но и сушит воздух. Без осушения охлаждать неправильно. Будет сырость

ЕгорКарпов-йм
Автор

I can see the steam of ice coming out of the fan. I doubt if the steam can condense on the fan wings and it can leak into the motor unit through the shaft of the fan wings. But nice work.

thoochani
Автор

If you have enough money to buy the tools and components for making this, you can buy a good air cooler itself. It's a waste of money and time.

nideeptk
Автор

Parang delikado sya Lalo na sa bata baka makuryente just saying

shenafernando
Автор

That's a lot of humidity going into that room. Just going to make the heat worse

BigHossRBAM
Автор

I tried that before. The humidity it produced caused itchiness on skin

phillychannel
Автор

لا حاجة أن تكون المروحة داخل الصندوق البلاستيكي

nannoosha
Автор

That first sight cover view of steam coming out of the fan is edited. That was smoke not steam.😎

sarojmashant
Автор

Gar nicht gut Raum wird viel zu feucht gefahr für Lunge Schimmelpilz in Wohnung😢😢😢😢😢😢😢

db
Автор

All you’re missing is taking temperature without ice in the bucket and temperature after putting ice in the bucket and see the difference in the degrees the fan will cool you.

flycow
Автор

está porcaria não funciona o ar frio é pesado pra circular desta forma sobre o ventilador

valmirolivyr
Автор

Não entendi porque encaixar o ventilador na tampa. Melhor seria fixar ele na tampa com alguma super cola, fita dupla face, ou até mesmo usando parafusos. Segundo ponto frágil desse projeto, é a caixa de plástico. Esse material troca calor com o ambiente, e a condensação faz o lado externo da caixa, suar. Uma caixa de isopr seria porfeita para o projeto. Mas ainda tem outro ponto que pode melhorar. O ventilador. Ele consome muito mais que duas ou três ventinhas (cooler) daquelas que se usa em gabinetes de pcs.

adrianoalmeida
Автор

5mins of pleasure. Then your soaking wet and hot and tired from replacing ice bags

polandsprings
Автор

How to make you house more moist! This is not good. This is just opposite what you want to do because with this you cannot lower the temperature. Instead you should then lower the humidity inside the house.

paulirumbin
Автор

டேய் பேதில போவான் நீ ஓரு ஆர்டிஸ்ட்டுன்னு நிருவிச்சுட்ட🎉🎉🎉🎉🎉🎉🎉🎉🎉

Ganesan-lktc
Автор

seria ótimo um tutorial mais detalhado do processo completo

adrianofernandes
Автор

This will attract more moulds in your house..

shanenebria
Автор

Bhai mujhe ek diziyega kitna pesa hoa batana

RoyalGreen
Автор

Kita Penonton Video ini Kalo Bukan Ahli Membuat Kipas Seperti ini tidak Bakalan Bisa..

leefox