Logitech Harmony PRO 2400 EASY One Button Press Home Theater

Harmony pro 2400
THE MOST ADVANCED HARMONY EXPERIENCE YET
Logitech Harmony Pro 2400 provides your client with the most advanced Harmony experience yet. An all-new hub with extended range antenna, Ethernet with PoE, and six 3.5mm IR ports; plus a scrollable touch screen remote and home control buttons to simplify the entertainment and home control experience.

Music Credits go to:
Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0

[johnmariano]

Lol. The black thumbnail says it all. Hardworking lefthander. Thanks Zach!

[motorcopT]

I have the previous unit. Absolutely the best in the price range. I’m going to move it to the master bedroom theater and see if I can get it to operate my Stewart screen, TV and other components. The new one will go downstairs. It truly is worth every penny.

[cousinluigi]

You don’t need to use the IR transmitter if the AVR or preamp processor has a remote input. Just run a jack cable directly from the chosen output of the Harmony hub to the remote input jack on the back of the AVR/processor. :)

[keepingupwiththejones]

This is priceless. Chris did you tell him the lighting was perfect at the children's table. Zach is a great big kid at heart. Ethernet port is absolutely a nice feature. My hub takes 30 seconds to connect sometimes. I assume you can set up the remote via internet rather than USB connected to laptop like the Harmony remotes from ten years ago.

[ErgosProxy]

I have the basic Harmony Hub with the non-touch screen remote, the thing controls all my devices like a dream. One day I'll go fancy and upgrade to the elite remote since I hit the device limit.

[RagaiMeena]

thank you for this review. I have a few questions
1- can you add another touch-less remote to the hub?
2- can you control 2 zones ( 2 rooms) with a centralized AV setup simultaneously
3- what is the range of the RF?
4-how long can you extend the SMA antenna?
5-can it control Nvidia Shield and amazon fire over IP rather than bluetooth?
6- what is the range of BT?
Thank you in advance

[rcdude]

Have a question? If the tv is in the other room do you have one of those it blasters for the tv??? Is there a cord long enough? Or am i miss understanding and just answererd my own question in that the remote outputs ir also?

[David]

I bought one a couple months ago and I love it!!!

[russellpeterson]

I understand Harmony is dropping all of the remotes, they will still support the ones sold but they are getting out of this business. What remote would be a good alternative for owner programing. I would like to use a I Pad to control my home theater.

[jgc]

Thanx for the videos Zach....👀Will it work if I connect the IR output of my Samsung TV directly to the IR receiver and then put an IR extended cable to an amp on another room instead of having an extra amp....I also wish to control the amp volume and tv volume with the same remote control PS: when I am on the tv room I switch to speakers A and speakers B when I am in the room where the amp is. Cheers!🍺

[andyswaine]

The new Pro 2400 has 3.5mm IR jacks, the Harmony Pro has 2.5mm jacks not 3.5mm like you say in your video. Just wanted to clarify for you....

[ronaldpriest]

How long are the cables and can they be extended?

[nmtay]

Still using a Harmony 1100 but planning on upgrading down the road and this would be nice, too bad they don't sell this model directly to consumers/

[IDuffman]

Really Enjoy your videos Zach not sure how you spell your name lol. Wish you guys had Social Media other than YouTube so i could keep up with you guys more but keep doing what your doing if i had the money i would definitely have you guys come and install my home theater equipment.

[clgr]

6:38 this is why I sold my harmony system. The input lag is huuuuge and definitely notable.

[Slyder]

If it's anything like the harmony one like I have and don't use anymore the battery life really stinks, will only last maybe 3 days. Also, if you use another remote, say a dish network to turn on just the tv and set top box and go to turn it off with the harmony, it gets confused and vise versa the other way and you now have to manually turn one of the units on/off to get it in sync. Yes we use 2 different remotes.

[thomasc]

If I have the hub in my cabinet in a different room can it read the signals through the wall? The cabinet is on the same floor. Thanks

[RFelicie]

Hi, I'm interested in a Logitech Harmony Pro 2440, but I'm from Puerto Rico. Is there any way to buy it?

[arturofuentes]

Hello there, hoping all is well. On this System that you are showing the APPLE TV control. is the Apple tV being cotrolled via IR or IP ?

[kevonmanuel]

With IP control, does the hub and the devices talk to each other to confirm that the end devices are on their correct input?
With the elite, I still have to use "help" once in awhile to get the TV or the Receiver switch to correct input. It's 2020, these sorta problems should not exist anymore.