Rust Farming: Easiest Automatic Sprinkler System

preview_player
Показать описание
Set up an automatic sprinkler system that turns sprinklers on automatically for however long you like, however often you like. The simplest set up with minimal components and minimal power!
Рекомендации по теме
Комментарии
Автор

Probably the clearest video on sprinkler timer loop ive seen. Thanks!

wilhelml
Автор

This is the best!!
HEMP (need 5ml/min) timing for 4 large planters with 2 sprinklers.
45/72 - 45 Sec. watering in a 72 sec. cycle.

box
Автор

Everyone elses videos on this they lollygag so much and have stupid explanations. Thank you for being so clear and direct.

bowtiepower
Автор

I like on how you explain what's going on I've not seen a lot of tutorials do that

matthewkenyon
Автор

No tutorials have helped me so far! Thankyou

georgiadavies
Автор

I added a branch between Timer 1 and the splitter and then added another branch off that 1st branch. Power out on branch 1 goes to branch 2, power out on branch 2 goes to splitter. Each branch out went to separate water pumps. That way the pumps aren't always on draining the battery.

Winterscast
Автор

this is the best, most simple tutorial ive seen. <3

znpath
Автор

bless you sir

thank you for this great contribution to rust fluid pump theory

chandler
Автор

Very helpful i got as far to the water switch on and off and struggled with the timers and stuff much appreciated 🙏

Spiritso
Автор

Works !! Thank you :) its so confusing without ur video

QcMaggie
Автор

finally a video that just show how to a farm step by step, thx man

whatdadogdoin
Автор

By the way Original Poster, excellent video. Made it easy and I have saved this video for all my wipes.

springfieldsaint
Автор

Just an FYI if you can keep the water between 5500 and 6500 or close to it and your heating depending on what climate you are staying in you can achieve 100 percent across the board while your growing your plants. Temperate and cold, heat all the time. Desert only when the sun goes down. Blockers and solar panels can control the heating for you. It depends on what plant you are growing also so you will have to adjust the timers to food, hemp and berries depending on what your growing.

springfieldsaint
Автор

I realize this is a bit late but thanks for this upload. I've been trying to make this circuit work for a month now and you made it finally happen. Consider me sub'd and thanks again.

franklinshooter
Автор

Need 14 power initally for it work think thats the only thing he left out. I thought it would of been 6 i dont even know why it takes 14 but it worked for me after that.

anthonyrodriguez
Автор

love this, to the point and easy to understand video

bountiful
Автор

Not sure why so many having problems works on console just fine. Make sure you're branching enough power, make sure if not gravity fed to use the splitter not only for the toggle but for the power of the pump, make sure your timers are set correctly if you set the first timer to 15 secs then your second timer should be minimum 30 seconds giving you a 15 sec cycle off. Not having long enough second timer will cause not to loop as the second timer starts the moment the first timer starts. Typically 20 seconds for the first timer then 2 minutes for the second timer giving you 100 seconds between each cycle. Recheck wiring as well sometimes people make mistakes. Most likey though it would be not enough branch power...

Bloodynife
Автор

So the pump power needs another battery in, right? Or can I saperate the power from second(right) splitter?

ilovepsycho
Автор

i just dont know for how long i should leave the sprinklers on

yodani
Автор

ive done everything you said but it still does not work, when my timer turns off for how long it goes off for, it doesnt work as soon as the on one turns off it immediatly turns back on even with a longer timer

getonwithitnub