Golf Cart Tire Alignment for Bintelli EZGO Club Car Yamaha Icon Evolution Star Tomberlin Jeep Toyota

If you start noticing some uneven tire wear, you may need an alignment. You don't need to take the cart to a shop to fix the alignment, you can do it yourself with a few tools. Follow along and save your tires!

LINKS TO PRODUCTS USED IN THE VIDEO:

Crescent Lufkin 1-3/16 x 25' Command Control Series Yellow Clad Engineers Tape Measure - L1025CD-02

[oftenwrongparadigm]

What Facebook group or forum led you here?

[pisaas]

Thank you so much for this! I got my front tires replaced and my golfcart goes out of alignment on a daily basis :( This video gives me hope that I can fix this recurring issue on my end.

[morganxl]

Something is wrong, before I watched this video I checked my alignment and it was significantly toed out but handled okay. I wanted better tire wear so I made the alignment straight like you are showing here. At high speeds you almost lose control, the cart absolutely won't go in a straight line. It is so bad an unexperienced driver could possibly flip the cart over. I'm cosidering going back to a moderate amount of toe out or possibly toe in like cars have. I have a friend that says his does the same thing but we haven't checked his alignment yet.

[steveb]

Hi great video! I've had a huge issue with the front tires of my Bintelli Beyond wearing to the point of being bald on the outsides after only about 500 miles. My toe is fine, but to me it seems like there is a lot of negative camber that is leading to the wear. Is there anyway to adjust the camber on a Beyond? There is very little online unfortunately but you seem very knowledgeable. Thank you!

[walter]

How do you adjust the camber on a 2024 Icon i40L (it's lifted from factory)? It has front struts, too. Nice video, thanks for posting it.

[kylefishing]

Thats awesome

How do you straighten your wheel?

[AP-stli]

Are you happy with the build quality of your Bintelli? How about the ride quality? Thanks in advance

[moreofchoidurante]

Hi, do you have a video on how to install the DC converter that you have? Thanks!

[sokalsophia]

I have a icon i60L, i added a 2 inch spacers and now, my front wheels are going bald real quick, before this they were perfect. What should i do?

[andrearuffino]

Which color is your cart ... navy or hydro? Thanks.

[mattdillion]

Good video but just an fyi here . Those thingy's that You used the 18mm on are not called ball joints. That is called a, TIE ROD END. The thingy You used the 12mm on is called the TIE ROD. I will say though there was three nuts there . The ball joints are on the control arms . Just in case some uses this video and decides to replace a part they could get the right thing the first time . Just an fyi not ill will intended .

[whodatdad]

Has anybody figured out camber adjustments?