Nokta Legend 6' coil vs Deus 2 elevated nail over coins test.

$650 vs $1600.

[GENOBURRITO]

For the price difference, there should be a big difference in performance. That Deus 2 is nice. I would have to find many silvers in iron to make up for the difference in price though. No doubt though, the Deus is top shelf performance.

[richdtectntx.]

I'd refer back to 4 days ago and 6 days ago, 1893 indian and 2 wheats in a pounded curb strip with iron in the hole and the others with the legend on fire in the iron.The coins make a strong halo in the ground and i believe iron fades somewhat so then I refer to your words of wisdom about testing vs real life and wonder why configure this test at all.
I believe the legend popped out some stuff where you had been on the same exact spot with the deus 2 right before that.Love the videos and your determination.

[Iaincrosby]

Another brilliant video Paystreak. What I can't understand is why simple separation issues weren't picked up by Nokta/Makro earlier? I've seen a few tests where it fails badly on the beach and in iron. It's almost like the their interpretation of Multi frequency has taken a leap back in time to the days of the first FBS machines with the same separation qualities. It's a shame because Nokta/Makro are good value for money but there just seem to be so many simple flaws that should of been addressed earlier before the release. XP FMF is light years ahead in terms of performance. Yes you pay more but you're getting the real deal aren't you.

[HistoryRevisiteduk]

Hey buddy I’ve just done same test in my house with nails in floorboards as well m2 tone break back to 7 . And with the 11 inch coil. The legend hits the coin 6 inch above

[cmplugs]

Glad I watched this video. I’m going to hold off updated my D2 for awhile. Thanks for the info!

[dirtfishingnewfoundland]

I really love all these tests very informative knowledge is power thanks for all the test videos very very helpful I got 1700s land tons of iorn and alot of great relics amongst the iorn

[oldplucker]

While the Deus 2 could be amazing. With my settings on the Nox and the 9.5x5 elliptical I am getting brilliant results in dense iron and with better depth. My soil is full of iron oxide and many iron nails and objects. I can pull 10 bits of iron out of one small hole.
I am using multifrequency and its getting the small non ferrous objects. Some bits very tiny. I am not making excuses for the Minelab non response to emails which is very bad. But the Nox is killing it on my difficult iron ground. I pulled out 3 artefacts 200-400 years old and a tiny Stirling silver teardrop loop in a one hour dig on my small plot two days ago. The Legend was pulling stuff the Deus missed in your video so the real test is what it finds in your ground and not air tests. As a reality check my Deus 1 has been out of action 2 weeks because my wireless headphones failed. So I have found reliability problems with the XP headphones.
I calculate there are around 20, 000 objects in my small plot so it will take quite a while to get them out. Probably 14, 000 are iron. My advice is go by what you find.

[carolinarelichunter]

I went from a multi kruzer to a deus 1 and honestly felt like my multi kruzer was a better machine, went back to productive sites with my deus and realized the multi kruzer didn’t miss much

[NJDigger]

My Brother Jeremy with another History Class !

[dukedenarie]

That gave me a bad memory of playing bloody knuckles with my friends when we were 12 lol.

[timlockhart]

I am hoping you can revisit this once the update comes out that Dilek is speaking of below pretty sure she is referring to the manual Iron bias update

[adrandavies]

nice video, the Deus 1 would hit all those targets to though, keep up the good work

[vonborgestad]

lower the tone break for iron to 5, tone break 10 is to high!

[scottp]

I did the same test and I picked up the dime. Not sure what’s going on.

[Hoderk]

Seen some other videos of the Legend with the iron break set down to 7 or so (from the default of 10) and it making a large difference. Can you update your test with the iron break lower to compare?

[proudlyamerican]

Do you all think that some folks jive with certain detectors while causing struggles with other? I've seen buddies of mine go from simple to advanced and do worse and never learning it all the while ruining the experience for themselves because they dont have the capacity to see this for what it is.? What's your thoughts on this? I've seen great detectorist using the equinox and just not getting along what so ever but can use deus and its broad across the board to this phenomenon. While others take same struggling machine and just is extension of arm.

[joelricheme]

i was looking to buy a DEUS-1. now that the DEUS-2 came out, im intrigued. looking at your vids i have quite a mixed feeling for the newest version. i want 9ne bad but the budget is sketchy these days. woulf you go for an older DEUS or the newest one ??? thanks

[gocetasevski]

Hello sir you caught my eye on YouTube I like your videos I want to ask you a question what are your thoughts about the nokta impact I'm debating about getting a nokta Legend but I have a note the impact with three separate different frequency not multi what do you recommend I do I haven't used this machine much because had a problem with my coil wire that I just put it away in the closet and bought a new detector actually whites 3D I currently I'm using a Vanquish 540 which I love what do you recommend I get the legends or should I get some more use out of note the impact I remember using this machine and I fell in love with it

[DigginLifeMetalDetecting]

I'm sorry, but the coil cord on the Legend is actually resting ON the coil 🙈

[skyking]

Can you show how the legend does with a ring or coin in black magnetic sand ?