How To Install Dreamcolor Acrylic LED Light Strips in 2020-2023 Sonata Dashboard

[WARNING] *********** Please use a fuse tap with a high amp capacity. If the fuses total more current than what the fuse tap is rated, it could cause big problems!!!*****************************

This is how I ran and installed my Acrylic LED Strips. I used a micro2 fuse tap and used the POWER fuse slot (cigarette lighter) and grounded to the chassis inside the left side behind the dashboard.

link to light strips used:

[justinpolo]

You did good man. I just installed the whole entire 22 in 1 kit. Took me about 6.5hrs. Removing dash. Running the wires, hiding the wires. Tapping into the right wires in the door. Use hot glue gun. I just didn't put the little dreamchasing led on the left side of the steering wheel. Just put it in the front lol. Took all four door panels off and installed the 4 pieces in each door. Time consuming foreal.

[lordsheebus]

thank you for this. i was able to do it myself because of your video. appreciate you so much 🙏

[BoRiGoTsKiLLz]

Great info. I'm installing these in a 2024 tucson limited. Hopefully I can find all the power wires and complete this successfully 😂

[Sorfor_]

Hey bro nice vid!! But could you please make a video explaining about the wiring and the connection that you did to power the main box? I would be so grateful!

[acej]

Thank you, I have an Elantra so I should see the same things that you are seeing. Question tho, when you tapped into the fuse box is there anything you have to disconnect before attaching the wires or should it go straight in. Thank you

[javiergonzalez]

Thank you. But did you considering that the fuse tap it is for 20amp CKT max.
I have a question did you or someone know wath fuse it is or worksimilar to Dome ligths. I try to found the fuse for diurn light or the short ligth but I think that are controlled by a module not a fuse. I need a fuse socket that turn off when the car it is off byt come life when open the door locks.

[kennethrenteria]

Does the sub controllers have extra connections to connect another strip to the sub controller ?

[MateoPCVazquez]

You have to connect it to your radio? Or can you plug it into a simple usb?

[takoathomas]

Where did you get the ground wire ? Also how many main controllers did you use

[russellfields]

Was the 6 -1 kit enough to do the front and back doors ?

[masonhoare]

I bought the same kit so do i need to buy fuse taps also?

[chrisalexander]

Isn't a 25 amp fuse a little too much? I feel like a 10 amp would suffice.

[takoathomas]

Did you use the long strip with the 2 power connection one on each side? And did you cut one off?