Arduino UNO - cheap vs. expensive

-----------------------------------------------------

Links from the video:

Related videos:

------------------------------------------------------

It is better to buy a cheap Arduino UNO, or the more expensive one? Here I will show you a few Arduino UNO boards that I have and use. What is your favorite Arduino UNO board?

------------------------------------------------------

Do you have any questions? Suggestions for the next video? Please put those down in the comment section. I try to answer as many questions as I can. Thank you for watching, reading the video description and I hope to see you next time. Good luck with your projects!

------------------------------------------------------

#arduino #diy #OLED

------------------------------------------------------

[oskimac]

I got my first uno original to contribute. The all my boards came from the cheapest aliexpress source, never a problem.

[bimokayoba]

I have many different Arduino uno boards, but i have never searched for the difference.
thank you for the clarification

[zodakb]

I've had one of those cheap $3 Uno boards from Ali for years, and never thought of putting in a row of male headers. DOH! Thanks, that was quickly fixed. Another handy thing on that board is the connection points next to the ICSP header.

[andymouse]

I still have loads of love for the UNO ! I also have a YUN ! great video, thanks!

[enkidu]

so this is just an advert for that unreleased board. nice

[deaafrizal]

im really wait u to upload new video, always interesting. new subscriber here!

[Jrok]

Thankyou for making my Friday even better!

[bangleoelektro]

I already use $3 uno for a while now and I not found any problem yet 😁

[yorgle]

I like the tiny form factor of the "SS Micro". It has the USB A plug builtin. I've bought some $3 units, and one came without the bootloader programmed, and one came without the reset line connected. Neither were hard to find/fix but it was a bit of a surprise. ;D

[scott]

IThe project I done that you did of the gearknob I used a cheap arduino uno board I had issues of it not loading the program on it and recently bought the proper arduino uno board and it is working flawlessly

[Splarkszter]

I wish for RP2040 microcontroller boards in the same format as the arduino ones.

The Arduino form factor is so easy to use.

The RP2040 is way faster and cheaper.

[steveyoutube]

LGT8F328P are very good, cheap, 32Mhz, 5v inputs. .and they offer a usb c connector too

[GoodVrGames]

Or you can buy Nano and breadboard for more pins and next comfortable soldering.

[Aplysia]

The best arduino board is the one with the waifu silkscreened on it.

[uNails]

I've been using the Ruggeduino boards mostly because my projects require higher voltages. But they're tough, and hard to kill. Might makes take on industry-like applications.

[smooth-jamie]

They are ok until you need something specific. I found the high output logic of the Rx and Tx are very low and I had to put a level shifter on the pin to get the full 5V. This problem doesn't exist on a genuine Nano, but you get what you pay for 😊

[jasonwhite]

Nice, but you didn't answer the question or say how much the robo board is?

[TomboRectify]

My fake Arduino Mega for some reason only can very weakly turn on the pins, and my fake Arduino Nano just somehow started only accepting code from a specific selection from Android version of Arduino IDE. And that's only sometimes.

[EmoticonFury]

Can you do a video start to finish using an ESP32-2432S028R? They’re so cheap and widely available, I don’t fully grasp how to make my own programs for them yet. They are Arduino IDE compatible and like $10.

[CorvusCorps]

Can you show us some stuff using a pinecil Ox64 or luckfox pico? Very cheap boards!