Slicer for Fusion 360 | Laser Cutter and CNC Router Projects

Slicer for Fusion 360 | Laser Cutter and CNC Router Projects // By the end of this video, you’ll know how to use the Fusion 360 Slicer app to split up your files for laser cutting or CNC router projects.

TIMESTAMPS
0:00 - Using Slicer for Fusion 360
5:17 - Slicer for Fusion 360 Add-In
6:03 - Scaling the object
7:07 - Setting up the manufacturing settings
9:56 - Choosing the construction technique
10:51 - Cut layout
14:42 - Viewing the generated instructions
16:51 - Plywood demo
18:04 - Adjusting the cut distribution

TUTORIAL RESOURCES

TOP FUSION 360 PLAYLISTS

________________________________

DISCLAIMER
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this.

—
#Fusion360 #ProductDesignOnline #CNC #Woodworking

[ProductDesignOnline]

__
__
*TIMESTAMPS*
0:00 - Using Slicer for Fusion 360
5:17 - Slicer for Fusion 360 Add-In
6:03 - Scaling the object
7:07 - Setting up the manufacturing settings
9:56 - Choosing the construction technique
10:51 - Cut layout
14:42 - Viewing the generated instructions
16:51 - Plywood demo
18:04 - Adjusting the cut distribution

[archphase]

@ProductDesignOnline ...I was shattered when Autodesk pulled the plug on (the old) Slicer for Fusion 360 and have been searching for a replacement ever since. I had structured a practice around it and found it one of the most useful pieces of design software ever. Do you know of any other software that does what it did?... or the developers? I've been hunting for ages and the only thing I've found that comes close is FlatFab (but really nowhere near as good). I'm sure there are lots of others that miss it too. Thanks in advance

[paulzagoridis]

I want to CNC a giant (1000mm) version of a 3d Print model out of foam and was wondering how to slice it. I'll give this a go. Looking for slicing tutorials for CNC gets flooded by all the 3D Printing slicing tutorials, glad I found yours

[AaAa-hcro]

Thank you very much..a very wonderful explanation

[jamessturgeon]

Great tutorial and very clear introduction to Slicer. It’s especially good to see how to approach correcting errors in the slices. I will try some scaled down furniture just to see how the flow works then see where that leads.

[leadbellymetalworksllc]

Now that fusion 360 doesn’t support this app, how would you go about doing this now in fusion 360? Thanks for the awesome videos!

[null]

The optimization for the lamp rings is surprising. I would expect a small set of sheets, each with a slightly smaller series of concentric rings.

[rxraine]

Thanks for this and all your other videos, Kevin. Your consistent and concise style really is a pleasure to watch. I've wondered how to slice for lasers for a while now, and tripped over this one while looking at your other stuff. Twenty minutes later and I feel like an expert. I expect my stock of plywood and card to be very much depleted by the other side of this rainy weekend. :)

[kelvink]

I always learn something from your videos, thanks for the tips on fixing the errors and thanks for posting

[Snagglepuss]

Waiting for my first laser cutter to come, then this will be my first port of call to get started, thanks from NZ

[klayjones]

Also thank you for not having a 5 minute intro repeating the title of the video

[Sbregher]

Yay, that I found this video! What an awesome tutorial video! It will help me tremendously! Thank you!

[thebeastbrothers]

is there any alternative for this process nowadays? your videos are great!

[salimahmed]

This one of the best tutorials I've watched. Thank you

[kevinrhodes]

Another great video and a very interesting tool! If you are open to requests, I would love to see something on framing, rail and stile panel doors, approaches to joinery for finger/dovetail/tenon work, and generating cut lists and diagrams.

[HerbalinfoGoneRaw]

This video helped me a lot! Thank you for this!

[hamadal-khaldi]

This is the best video I see it’s about slider thank you very much

[joga]

Kevin,
I have been following most of your videos, they are great. I'm trying to find the fusion 360 slicer and when try to find/ or download it, is telling is not available for download. I have been working already for a while in Fusion and i want to start testing with an small CNC machine. Is a GRBC controller, i can find a concise information in what to do. My pc is a mac. is there any links you can provide? please.

Jose.

[lostmanamiga]

this is the best Slicer demo I have seen. Really nice!

[tonyfoxxbuilds]

Great video! I want to hydro form some 3in copper pipe. Is there an option to make each section a 4.5in square?