How to configure Bridge over multiple NICs as LAN - pfSense

In this video, I show you how to configure pfSense bridge over multiple NICs as LAN
0:00 Introduction
0:02 Interfaces Assignments
0:34 Bridges
1:24 Firewall Rules
1:45 Services DHCP Server

#netvn #pfsense

[DarrylMcGee]

This was extremely helpful! I didn't know about the pfSense bridge option, but with your instructions was able to bridge a vlan (from a vlan trunk) to another local physical ethernet port. So now the pfSense bridge is serving DHCP to the local port and the ports on a managed switch attached to the vlan. Thank you!

[scottpowell]

Thank You! Very helpful and I have all 3 of my NICs working together!

[ofbarea]

Just installed pfsense, and this was an excellent sharing for a clueless like me. Many thanks.

[weindiansdotin]

This is the video which i am waiting for

[pauloalbertogoncalveslins]

Congralutions!
I have two pfsenses: PF1 with m wan and lan (dhcp enabled)

PF 2 - LAN (Receiving dhcp from PF1).

Both are seen inside the dhcp network.
But with the wan (real) ip I can't access PF2 (internal IP) even with Nat on different ports for each.
Firewall rules all released.

[AzelyAzman]

This tutorial have been so useful, thank you!

[eyhabsoft]

Your videos are always useful, go on👍

[PradeepKumar-nhoo]

Thanks for video.
Please do the video of how to create own DyDDNS dynamic server.

[JeffZiegler]

I was able to create the bridge & DHCP/DNS is working fine but port to port is not working?

[raomega]

Hi, is it possible to pass through PPPoE connection on LAN going out to WAN? My Pfsense WAN connected on a switch and Router with PPPoE connected to its LAN. When the router connects to switch, it authenticates but when connecting to LAN of Pfsense it doesn't. Pfsense configured as transparent proxy so it should just let it pass. Can you give possible issue with my setup? New to Pfsense btw. Thank you in advance.

[Vietquat]

bác đang làm sysad cho bên nào đấy ạ :D

[edbouhl]

So by creating a bridge with, for example, three 100 Mb connections between your pfSense server and your main switch, you can increase the effective speed between your WAN connection to your switch to 300 Mb? Sorry if this is a painfully obvious question.

[kremicfein]

Is the DHCP server required for bridging or is it otional?

[LuongThanhThang]

You can tutorial setup block site for squid

[MichaelAngeloSamsonPhD]

Why would you be needing to use a Bridge LAN?

[Mr_Meowingtons]

ok it works but i cant see any of the other computers on the network?!??!?!?!

[Shiyri_von_der_Berezniki]

Привет, как на pfsense настроить соединение локальных сетей через интернет l2tp/IPsec?

[TuxClaudiu]

System: Advanced: System Tunables
| net.link.bridge.pfil_member | Set to 0 to disable filtering on the incoming and outgoing member interfaces. | default (1) |
| net.link.bridge.pfil_bridge | Set to 1 to enable filtering on the bridge interface | default (0) |
This is to avoid filtering on NICs and do the filtering only on bridge interface.
Source: netgate forum.

[rogerio.qualiti]

Now, Create interface vlan on Bridge, Please!!!!

[Sergunuk]

Pls do the same video with ovpn, wireguard and suricata on pfsense! +)